Everything else
Top Edge Notched Plate
- Bounding box
- 16.0 × 1.0 × 0.1 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D engineering line drawing of the TOP EDGE profile only. Overall width: 16.000 inches. The profile must be perfectly symmetrical about the 8.000-inch centerline. Requirements: - Draw one continuous horizontal top edge. - Create exactly two identical downward-facing trapezoidal notches. - Position the two notches symmetrically about the centerline. - The left and right ends of the profile must be identical. - The distance from each end of the profile to its nearest notch must be equal. - The spacing between the two notches must be centered. - Only the inside walls of each notch have a 5.0° draft angle. - The bottom of each notch is horizontal. - All outside horizontal edges remain perfectly horizontal. - Do not draw the bottom profile. - Do not add square openings, PVC holes, dimensions, labels, or shading. - Output only a clean black vector line representing the 16-inch top profile.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 16 in | 2 – 48 |
| End to Notch Distance | 2 in | 0.5 – 8 |
| Notch Top Width | 4 in | 0.5 – 8 |
| Notch Depth | 0.75 in | 0.125 – 2 |
| Body Height | 1 in | 0.125 – 3 |
| Draft Angle (deg) | 5 deg | 1 – 15 |
| Extrusion Thickness | 0.1 in | 0.05 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like