Loading the interactive model…
Interactive 3D model of Tilted Display Enclosure with Hidden Handlebar MountEverything else
Tilted Display Enclosure with Hidden Handlebar Mount
9 views
- Bounding box
- 110.0 × 125.9 × 123.7 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 16, 2026
Download
Free to download and use. See the terms.
The prompt
Muokkaatko piirrustusta siten että tanko kiinnitys jää ikään kuin näytä taakse piiloon ja näyttö on 45 asteen kulmassa että se on kuljettajan katseeseen oikeassa kulmassa
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure width | 110 mm | 60 – 160 |
| Enclosure height | 90 mm | 50 – 150 |
| Rear housing depth | 40 mm | 20 – 80 |
| Front plate thickness | 3 mm | 2 – 8 |
| Wall thickness | 3 mm | 2 – 6 |
| Display cutout width | 80 mm | 40 – 120 |
| Display cutout height | 50 mm | 30 – 100 |
| Screw boss diameter | 8 mm | 5 – 14 |
| Screw hole diameter | 4.2 mm | 3 – 8 |
| Cable gland diameter | 8 mm | 5 – 20 |
| Display tilt angle | 45 deg | 0 – 90 |
| Clamp mount width | 70 mm | 40 – 120 |
| Clamp mount height | 50 mm | 30 – 100 |
| Clamp mount depth | 30 mm | 20 – 60 |
| Handlebar diameter | 25 mm | 15 – 35 |
| Clamp bottom wall | 8 mm | 4 – 15 |
| Clamp slot width | 2 mm | 1 – 5 |
| Clamp screw diameter | 5 mm | 3 – 8 |
| Clamp screw spacing | 30 mm | 15 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS