120022338
Loading the interactive model…
Interactive 3D model of TILT-X1 Lightweight Wing v6

Everything else

TILT-X1 Lightweight Wing v6

1 views
Bounding box
223 × 1200 × 38 mm
Engine
3D Printing B-rep
Parameters
11
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Adjusted TILT-X1 Lightweight Wing v6: end_wall=1.2, rib_gap=80, skin=0.5

Parameters

NameValueRange
Wing chord200 mm160 – 220
Carbon spar tube outer diameter10 mm8 – 12
Nacelle tilt: 0 = hover, 90 = forward flight90 mm0 – 90
Where the inner hinge lug starts ; smaller = longer aileron (max ~245 for a 250 mm bed)244 mm150 – 260
Skin thickness of hollow parts ; 0.8 = two 0.4 mm perimeters0.5 mm0.5 – 2
Spacing of internal ribs80 mm30 – 80
Rib thickness0.8 mm0.5 – 1.5
Thickness of the end wall at each panel joint1.2 mm1.2 – 4
Gap between hinge knuckles0.5 mm0.3 – 0.9
Aileron hinge rod hole, 2 mm carbon rod2 mm1.8 – 2.4
Socket clearance per side0.2 mm0.1 – 0.4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

TILT-X1 Lightweight Wing v6 - Free CAD Model (STEP, STL) | TextoCAD