TILT-X1 Lightweight Wing v6

1 views

Bounding box: 223 × 1200 × 38 mm
Engine: 3D Printing B-rep
Parameters: 11
Published: November 6, 2026

Download

Free to download and use. See the terms.

The prompt

Lightweight TILT-X1 wing set: hollow ribbed skins with thin end walls and small dowel sleeves, ailerons, tip pods and nacelles hollowed.

Parameters

Name	Value	Range
Wing chord	200 mm	160 – 220
Carbon spar tube outer diameter	10 mm	8 – 12
Nacelle tilt: 0 = hover, 90 = forward flight	90 mm	0 – 90
Where the inner hinge lug starts ; smaller = longer aileron (max ~245 for a 250 mm bed)	244 mm	150 – 260
Skin thickness of hollow parts ; 0.8 = two 0.4 mm perimeters	0.8 mm	0.5 – 2
Spacing of internal ribs	50 mm	30 – 80
Rib thickness	0.8 mm	0.5 – 1.5
Thickness of the end wall at each panel joint	2.4 mm	1.2 – 4
Gap between hinge knuckles	0.5 mm	0.3 – 0.9
Aileron hinge rod hole, 2 mm carbon rod	2 mm	1.8 – 2.4
Socket clearance per side	0.2 mm	0.1 – 0.4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS