Gears and transmission
TILT-X1 Lightweight Fuselage and Tail v4
- Bounding box
- 856 × 408 × 258.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Lightweight TILT-X1 fuselage, tail, gear and trays: thinner shell, hollow ribbed stabilizer and fins, lighter wing seat and tray windows.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage shell thickness | 1 mm | 0.8 – 3 |
| Wing chord, sets the wing seat length | 200 mm | 160 – 220 |
| Skin thickness of hollow tail parts | 0.8 mm | 0.5 – 2 |
| Spacing of internal ribs | 40 mm | 25 – 80 |
| Rib thickness | 0.8 mm | 0.5 – 1.5 |
| Gap between hinge knuckles | 0.5 mm | 0.3 – 0.9 |
| Hinge pin / elevator torque rod hole, 2 mm rod or 1.75 mm filament | 2 mm | 1.8 – 2.4 |
| Socket clearance per side | 0.2 mm | 0.1 – 0.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled