Brackets and mounts
TikiTender V3 RC Catamaran
- Bounding box
- 1020.2 × 420.4 × 240.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a premium RC catamaran pool service boat called TikiTender V3. The boat will carry four Australian 375 mL drink cans and a large removable snack tray. It is designed for a backyard swimming pool, so stability, appearance and serviceability are far more important than speed. Overall dimensions approximately 720 mm long × 420 mm wide. Requirements: • Twin catamaran hulls with rounded wave-piercing bows. • Bridge deck should sit above the waterline like a true catamaran. • Waterproof removable electronics pod integrated into the centre of the deck. • Snack tray forms the waterproof lid. • Four drink holders positioned inboard from the deck edges. • Twin APISQUEEN U2 Mini thrusters mounted in protected recessed cassettes at the stern. • FPV camera mast is the only component extending significantly above the deck. • Front-mounted water cannon. • Smooth modern industrial design similar in quality to DJI or Bambu Lab products. • Designed for FDM printing on a Bambu P1S with all parts fitting inside a 256 × 256 × 256 mm build volume. Prioritise clean assembly, modularity, waterproofing and excellent visual proportions.
Parameters
| Name | Value | Range |
|---|---|---|
| Hull Length | 720 mm | 200 – 1000 |
| Hull Width | 80 mm | 20 – 200 |
| Hull Height | 70 mm | 20 – 200 |
| Bow Taper Length | 60 mm | 10 – 200 |
| Hull Fillet Radius | 15 mm | 1 – 30 |
| Bow Tip Width | 1 mm | 0.1 – 5 |
| Hull Center Y Offset | 170 mm | 100 – 250 |
| Deck Length | 400 mm | 100 – 800 |
| Deck Width | 400 mm | 100 – 800 |
| Deck Thickness | 15 mm | 2 – 50 |
| Pod Length | 120 mm | 50 – 300 |
| Pod Width | 90 mm | 50 – 300 |
| Pod Depth | 70 mm | 20 – 200 |
| Snack Tray Length | 120 mm | 50 – 300 |
| Snack Tray Width | 90 mm | 50 – 300 |
| Snack Tray Depth | 20 mm | 5 – 50 |
| Drink Holder Inner Dia | 75 mm | 40 – 100 |
| Drink Holder Wall Thickness | 3 mm | 1 – 10 |
| Drink Holder Depth | 120 mm | 50 – 200 |
| Drink Holder X Position | 50 mm | 20 – 150 |
| Drink Holder Y Position | 150 mm | 50 – 200 |
| Thruster Cassette Width | 60 mm | 30 – 100 |
| Thruster Cassette Height | 60 mm | 30 – 100 |
| Thruster Cassette Length | 80 mm | 30 – 150 |
| Mast Diameter | 10 mm | 5 – 30 |
| Mast Height | 120 mm | 20 – 300 |
| Mast X Position | 150 mm | 0 – 200 |
| Mast Base Plate Diameter | 20 mm | 10 – 50 |
| Mast Base Plate Thickness | 3 mm | 1 – 10 |
| Water Cannon Barrel Dia | 30 mm | 10 – 80 |
| Water Cannon Barrel Length | 50 mm | 20 – 200 |
| Water Cannon Mount Dia | 40 mm | 15 – 100 |
| Water Cannon Mount Height | 10 mm | 2 – 50 |
| Water Cannon Z Center | 10 mm | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu