Brackets and mounts
Three-Tier Hydroponic Rack Assembly
- Bounding box
- 3000.0 × 1176.2 × 3000.0 mm
- Engine
- Precision B-rep
- Parameters
- 40
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
=================================================================================== [ TOP AIRFLOW HOOD & CANOPY BAFFLE ] (Coroplast / Foam Board Top Ceiling) =================================================================================== TOP TIER (Tier 3) ----------------------------------------------------------------------------------- [ 4ft LED Light Bar Assembly ] (Zip-tied to shelf underside) | +--+-----------------------------------------------+ | [ 36" x 24" Heavy-Duty Mixing Tub ] | <--- ( Clip Fan angled 30° down ) +--+-----------------------------------------------+ | (1/2" PEX Supply) | (1/2" CPVC Drain Drop) ^ v [ 1/2" Ball Valve ] [ Standpipe Overflow ] | | =================================================================================== MIDDLE TIER (Tier 2) ----------------------------------------------------------------------------------- [ 4ft LED Light Bar Assembly ] | +--+-----------------------------------------------+ | [ 36" x 24" Heavy-Duty Mixing Tub ] | <--- ( Clip Fan ) +--+-----------------------------------------------+ | (1/2" PEX Supply) | (1/2" CPVC Drain Drop) ^ v [ 1/2" Ball Valve ] [ Standpipe Overflow ] | | =================================================================================== BOTTOM TIER (Tier 1) ----------------------------------------------------------------------------------- [ 4ft LED Light Bar Assembly ] | +--+-----------------------------------------------+ | [ 36" x 24" Heavy-Duty Mixing Tub ] | <--- ( Clip Fan ) +--+-----------------------------------------------+ | (1/2" PEX Supply) | (1/2" CPVC Drain Drop) ^ v [ 1/2" Ball Valve ] [ Standpipe Overflow ] | | =================================================================================== BASE LEVEL (60 L Independent Reservoirs) ----------------------------------------------------------------------------------- [ 27-Gallon Tote 1 ] [ 27-Gallon Tote 2 ] [ 27-Gallon Tote 3 ] +----------------------+ +----------------------+ +----------------------+ | [250 GPH Pump] | | [250 GPH Pump] | | [250 GPH Pump] | +-------+--------------+ +-------+--------------+ +-------+--------------+ | | | +-> [3-Way Bypass Valve] +-> [3-Way Bypass Valve] +-> [3-Way Bypass Valve] | | | v v v (Normal Mode: (Normal Mode: (Normal Mode: To Top Tub) To Middle Tub) To Bottom Tub) | | | (Drain Mode: (Drain Mode: (Drain Mode: To Waste Hose) To Waste Hose) To Waste Hose) ===================================================================================
Parameters
| Name | Value | Range |
|---|---|---|
| Hood Length | 914 mm | 500 – 1500 |
| Hood Width | 610 mm | 300 – 1000 |
| Hood Thickness | 6 mm | 3 – 20 |
| LED Length | 1219 mm | 500 – 1500 |
| LED Width | 50 mm | 20 – 100 |
| LED Height | 30 mm | 10 – 60 |
| LED Offset Above Tub | 20 mm | 0 – 100 |
| Mixing Tub Length | 914 mm | 400 – 1500 |
| Mixing Tub Width | 610 mm | 300 – 1000 |
| Mixing Tub Height | 300 mm | 100 – 600 |
| Mixing Tub Wall Thickness | 5 mm | 2 – 12 |
| Bottom Tier Tub Height Above Floor | 800 mm | 400 – 1500 |
| Vertical Gap Between Tiers | 700 mm | 400 – 1000 |
| Clip Fan Diameter | 150 mm | 80 – 250 |
| Clip Fan Depth | 100 mm | 50 – 200 |
| Fan Mount Offset From Tub Side | 12 mm | 0 – 50 |
| Top Fan Downward Angle | 30 deg | 0 – 60 |
| PEX Supply OD | 12.7 mm | 6 – 25 |
| PEX Supply Drop Length | 1500 mm | 500 – 2500 |
| PEX Offset From Tub Left Edge | 30 mm | 0 – 100 |
| CPVC Drain OD | 12.7 mm | 6 – 25 |
| CPVC Drain Drop Length | 1200 mm | 500 – 2500 |
| CPVC Offset From Tub Right Edge | 30 mm | 0 – 100 |
| Ball Valve Length | 50 mm | 30 – 80 |
| Ball Valve Width | 50 mm | 30 – 80 |
| Ball Valve Height | 40 mm | 20 – 80 |
| Standpipe OD | 12.7 mm | 6 – 25 |
| Standpipe Height | 300 mm | 100 – 500 |
| Reservoir Tote Length | 610 mm | 300 – 1000 |
| Reservoir Tote Width | 460 mm | 200 – 800 |
| Reservoir Tote Height | 400 mm | 200 – 800 |
| Reservoir Tote Wall Thickness | 4 mm | 2 – 12 |
| Pump Length | 100 mm | 50 – 200 |
| Pump Width | 80 mm | 50 – 200 |
| Pump Height | 100 mm | 50 – 200 |
| 3-Way Bypass Valve Length | 75 mm | 40 – 120 |
| 3-Way Bypass Valve Width | 75 mm | 40 – 120 |
| 3-Way Bypass Valve Height | 50 mm | 25 – 100 |
| Waste Hose OD | 12.7 mm | 6 – 25 |
| Waste Hose Length | 3000 mm | 1000 – 5000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu