Brackets and mounts
Three-Box Enclosure Assembly with Battery, Laser, Brass Tube, and Boards
- Bounding box
- 110.0 × 100.0 × 134.8 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
three boxes, on box contains a battery (bottom), the next box up contains a laser emitter, and a horizontal brass nipple 3/4 inch OD, 20.5 mm ID, 3 inches long, oriented 45 degrees angle inside the box (corner to corner orientation), a picacilly rail clamping sytem holds the laser emitter tube, a daughter board that is roughly 34.4 mm by 42 mm diameter (in same box as the laser emitter and the brass tube) and the brass tube at exactly axial centered coordinates, and upper box (third box) contains the main board electronics which is an 80 mm b8 80 mm board.
Parameters
| Name | Value | Range |
|---|---|---|
| Bottom Box Length | 100 mm | 50 – 200 |
| Bottom Box Width | 80 mm | 40 – 160 |
| Bottom Box Height | 40 mm | 20 – 100 |
| Middle Box Length | 110 mm | 50 – 200 |
| Middle Box Width | 90 mm | 40 – 160 |
| Middle Box Height | 60 mm | 20 – 120 |
| Upper Box Length | 100 mm | 50 – 200 |
| Upper Box Width | 100 mm | 40 – 160 |
| Upper Box Height | 35 mm | 15 – 100 |
| Box Wall Thickness | 3 mm | 1 – 10 |
| Battery Length | 70 mm | 20 – 150 |
| Battery Width | 55 mm | 20 – 120 |
| Battery Height | 25 mm | 10 – 60 |
| Laser Tube Diameter | 20 mm | 5 – 50 |
| Laser Tube Length | 60 mm | 20 – 150 |
| Clamp Length | 60 mm | 20 – 150 |
| Clamp Width | 30 mm | 10 – 80 |
| Clamp Height | 25 mm | 10 – 60 |
| Brass Tube OD | 26.7 mm | 10 – 60 |
| Brass Tube ID | 20.5 mm | 5 – 55 |
| Brass Tube Length | 76.2 mm | 20 – 200 |
| Brass Tube Angle | 45 deg | 0 – 90 |
| Daughter Board Length | 34.4 mm | 10 – 100 |
| Daughter Board Width | 42 mm | 10 – 100 |
| Daughter Board Thickness | 1.6 mm | 0.5 – 5 |
| Main Board Length | 80 mm | 20 – 150 |
| Main Board Width | 80 mm | 20 – 150 |
| Main Board Thickness | 1.6 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu