Everything else
Threaded Disk M10x1.5 with Ø3.2 x 7mm Locating Pin
- Bounding box
- 101.6 × 101.6 × 40.3 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Disk 101.6 mm diameter x 33.3 mm high with M10x1.5 internal helical blind thread 25 mm deep, outer top and bottom edges rounded R0.8, plus one integral locating pin Ø3.2 mm projecting 7 mm above the top face. Pin center is 8.5 mm from the M10 hole center along the same radial direction, matching the mating part's Ø3.6 mm bottom blind hole.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | — | 20 – 300 |
| Height | — | 10 – 200 |
| Thread Nominal Diameter | — | 3 – 60 |
| Thread Pitch | — | 0.35 – 6 |
| Threaded Hole Depth | — | 3 – 190 |
| Thread Half-Flank Angle | — | 10 – 45 |
| Thread Fit Clearance on Radius | — | 0 – 0.6 |
| M10 Hole Centre Offset from Disk Axis | — | 0 – 140 |
| Locating Pin Diameter | — | 1 – 10 |
| Locating Pin Height Above Top | — | 1 – 20 |
| Pin Offset from M10 Hole Centre | — | 1 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm