Brackets and mounts
Threaded Brush Pivot Bracket
- Bounding box
- 70 × 26 × 5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
i need a bracket to hold a threaded brush fitting. the brush holder needs to an internal thread. total length 70mm, lenght from cetre of brush to pivoting arm 50mm. have the main boddy flat about 5mm thick. from the body have a raised cylinder with a 5mm hole through for a rod to come in fromm the top for the pivot/driver
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length, end to end | 70 mm | 40 – 200 |
| Brush centre to pivot centre | 50 mm | 15 – 190 |
| Brush end width / boss diameter | 26 mm | 16 – 60 |
| Flat body thickness | 5 mm | 3 – 12 |
| Brush boss height from bed | 16 mm | 8 – 40 |
| Pivot boss height from bed | 15 mm | 8 – 40 |
| Pivot rod hole diameter | 5.2 mm | 3 – 12 |
| Brush fitting thread major dia | 16 mm | 8 – 40 |
| Thread pitch | 2 mm | 0.5 – 4 |
| Radial clearance on thread | 0.2 mm | 0.05 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu