Brackets and mounts
ThermoSense Grind-Pod Assembly
- Bounding box
- 2626.6 × 146.0 × 433.0 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed 3D CAD assembly of a smart mixer grinder named **ThermoSense Grind-Pod**. Use mm units, separate editable components, and automatically assemble them correctly. **Dimensions and components:** - Main housing: 160 × 140 × 220 mm, rounded rectangular, matte white with navy accents, ventilation slots and rubber feet. - BLDC motor: cylindrical, 80 mm diameter × 75 mm tall, centered inside housing; 8 mm diameter shaft extending 35 mm upward. - Stainless-steel jar: 110 mm diameter × 180 mm tall, slightly tapered, positioned above housing and aligned with motor shaft. - Jar handle: curved, 145 mm tall, attached to jar side. - Lid: 115 mm diameter × 25 mm tall, with 35 mm central cap. - Jar coupling: 25 mm diameter × 18 mm tall, aligned with motor shaft. - Aluminum thermal hub: 35 mm diameter × 8 mm tall, with 28 mm inner-diameter O-ring. - MLX90614-type sensor module: 20 × 15 mm PCB, positioned facing thermal hub. - Motor controller PCB: 70 × 50 mm, mounted inside housing beside motor. - Current-monitor module: 25 × 20 mm PCB. - Hall sensor ring: 105 mm outer diameter, 95 mm inner diameter, 3 mm thick, positioned around lid rim. Ensure the jar sits **on top of the housing**, not through it. Align motor, shaft, coupling, and jar centrally. Keep internal electronics visible in an exploded view. Generate a complete multi-part assembly with an assembled isometric view and exploded view. Export as STEP for SOLIDWORKS, plus STL if available. This is a conceptual academic model, not manufacturing-ready or safety-validated.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 200 mm | 20 – 600 |
| Housing Width (X) | 160 mm | 100 – 300 |
| Housing Depth (Y) | 140 mm | 80 – 300 |
| Housing Height (Z) | 220 mm | 120 – 400 |
| Housing Corner Radius | 12 mm | 2 – 30 |
| Vent Slot Count | 6 pcs | 2 – 12 |
| Vent Slot Width | 8 mm | 3 – 20 |
| Vent Slot Height | 80 mm | 20 – 140 |
| Vent Slot Centre Height | 175 mm | 60 – 210 |
| Navy Accent Panel Width | 90 mm | 30 – 150 |
| Navy Accent Panel Height | 45 mm | 15 – 120 |
| Navy Accent Panel Thickness | 6 mm | 2 – 15 |
| Navy Accent Panel Centre Height | 110 mm | 30 – 200 |
| Rubber Foot Diameter | 18 mm | 8 – 40 |
| Rubber Foot Height | 8 mm | 2 – 25 |
| BLDC Motor Diameter | 80 mm | 40 – 120 |
| BLDC Motor Height | 75 mm | 30 – 150 |
| Motor Shaft Diameter | 8 mm | 4 – 20 |
| Motor Shaft Length | 35 mm | 10 – 90 |
| Jar Coupling Diameter | 25 mm | 12 – 60 |
| Jar Coupling Height | 18 mm | 6 – 50 |
| Jar Top Diameter | 110 mm | 60 – 200 |
| Jar Bottom Diameter | 100 mm | 50 – 200 |
| Jar Height | 180 mm | 60 – 350 |
| Jar Wall Thickness | 3 mm | 1 – 8 |
| Jar Floor Thickness | 6 mm | 2 – 20 |
| Jar Handle Height | 145 mm | 60 – 260 |
| Jar Handle Bar Diameter | 14 mm | 6 – 30 |
| Lid Diameter | 115 mm | 60 – 220 |
| Lid Total Height | 25 mm | 10 – 60 |
| Lid Central Cap Diameter | 35 mm | 15 – 90 |
| Hall Sensor Ring OD | 105 mm | 50 – 200 |
| Hall Sensor Ring ID | 95 mm | 40 – 190 |
| Hall Sensor Ring Thickness | 3 mm | 1 – 10 |
| Thermal Hub Diameter | 35 mm | 15 – 90 |
| Thermal Hub Height | 8 mm | 3 – 30 |
| O-Ring Inner Diameter | 28 mm | 10 – 70 |
| O-Ring Groove Width | 2 mm | 1 – 6 |
| PCB Thickness | 1.6 mm | 0.6 – 4 |
| Sensor PCB Width | 20 mm | 8 – 60 |
| Sensor PCB Depth | 15 mm | 6 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu