Brackets and mounts
ThermoBlend 1000 Exploded Multi-Part Model
- Bounding box
- 1416 × 96 × 239 mm
- Engine
- 3D Printing B-rep
- Parameters
- 50
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Create an editable 3D CAD model of ThermoBlend 1000, a portable 1000 mL insulated bottle combining a rechargeable blender and temperature-controlled heater. EXTERIOR: Cylindrical body, approximately 96 mm diameter × 230 mm tall (adjustable), secure removable lid, front touchscreen, liquid-level window with mL markings, and detachable bottom technology compartment. INTERIOR: Show a hollow inner vessel, outer shell, insulation layer, heating element, temperature sensor, removable blades, motor, rechargeable battery, battery protection board, control board, wiring, seals, charging port, and bottom housing. CONTROLS: Touchscreen with 40°C, 60°C and 80°C settings, separate manual heating and blending ON/OFF controls, battery indicator, and operating status. Neither function starts automatically. DESIGN DETAILS: Show the lid gasket and proposed pressure-release valve, blade-drive connection, motor mount, electronics enclosure, safety interlocks, and cleaning access. Keep electrical parts isolated from liquids and heat. REQUIREMENTS: Target 1000 mL usable capacity. Intended for fruit smoothies and protein shakes. Target up to 10-hour temperature retention, subject to testing. Model each component separately and make an exploded assembly. OUTPUT: Generate assembled exterior, exploded internal view, cutaway view, labelled parts, dimensions, and editable CAD files. Use realistic proportions and a premium consumer-product appearance. If the full assembly is too complex, create the main bottle first, then its internal components as separate parts. Mark assumed dimensions and unverified safety features. This is a concept model; heating, battery, pressure, blade safety, seals, and electrical systems require professional validation before manufacture.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 96 mm | 80 – 120 |
| Outer height | 230 mm | 180 – 300 |
| Wall thickness | 1.5 mm | 1 – 3 |
| Touchscreen cutout width | 55 mm | 40 – 80 |
| Touchscreen cutout height | 35 mm | 30 – 60 |
| Level window width | 15 mm | 8 – 30 |
| Level window height | 120 mm | 60 – 180 |
| Vessel outer diameter | 86 mm | 70 – 95 |
| Vessel height | 200 mm | 150 – 260 |
| Vessel wall thickness | 1.5 mm | 1 – 3 |
| Vessel top rim diameter | 90 mm | 80 – 100 |
| Vessel top rim height | 4 mm | 2 – 6 |
| Vessel bottom drive boss diameter | 30 mm | 20 – 50 |
| Vessel bottom boss height | 6 mm | 3 – 10 |
| Insulation thickness | 4 mm | 2 – 8 |
| Insulation height | 190 mm | 140 – 240 |
| Lid outer diameter | 96 mm | 80 – 120 |
| Lid height | 20 mm | 12 – 40 |
| Gasket outer diameter | 88 mm | 70 – 100 |
| Gasket inner diameter | 80 mm | 60 – 95 |
| Gasket height | 3 mm | 1 – 6 |
| Valve diameter | 8 mm | 4 – 14 |
| Valve height | 6 mm | 3 – 12 |
| Blade tip diameter | 60 mm | 40 – 80 |
| Blade assembly height | 12 mm | 6 – 20 |
| Blade hub diameter | 10 mm | 6 – 20 |
| Blade drive shaft diameter | 6 mm | 3 – 10 |
| Motor diameter | 36 mm | 24 – 50 |
| Motor height | 55 mm | 40 – 80 |
| Motor shaft diameter | 5 mm | 3 – 10 |
| Motor mount flange diameter | 50 mm | 35 – 70 |
| Heater outer diameter | 80 mm | 60 – 95 |
| Heater inner diameter | 40 mm | 20 – 60 |
| Heater height | 8 mm | 4 – 16 |
| Sensor diameter | 3 mm | 2 – 6 |
| Sensor length | 10 mm | 6 – 20 |
| Battery length | 70 mm | 50 – 100 |
| Battery width | 55 mm | 40 – 80 |
| Battery height | 20 mm | 10 – 40 |
| BMS board height | 6 mm | 3 – 12 |
| Control board width | 55 mm | 40 – 80 |
| Control board depth | 35 mm | 25 – 50 |
| PCB thickness | 4 mm | 2 – 8 |
| Touchscreen thickness | 2 mm | 1 – 4 |
| Bottom housing outer diameter | 96 mm | 80 – 120 |
| Bottom housing height | 35 mm | 20 – 60 |
| Bottom housing wall thickness | 2 mm | 1 – 4 |
| Charging port width | 12 mm | 8 – 20 |
| Charging port height | 8 mm | 6 – 15 |
| Exploded spacing along X | 120 mm | 80 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu