Loading the interactive model…
Interactive 3D model of Terrain Threader Auger Rover (Colored + Motion Pose)Everything else
Terrain Threader Auger Rover (Colored + Motion Pose)
1 views
- Bounding box
- 594.0 × 260.6 × 206.3 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- September 23, 2026
Download
Free to download and use. See the terms.
The prompt
can u add colors and make it moving
Parameters
| Name | Value | Range |
|---|---|---|
| Auger drum diameter | 80 mm | 40 – 160 |
| Auger length | 480 mm | 200 – 800 |
| Flight inner radius | 40 mm | 25 – 70 |
| Flight outer radius | 55 mm | 35 – 95 |
| Flight thickness (axial) | 11 mm | 3 – 25 |
| Helix pitch | 70 mm | 30 – 200 |
| Auger center bore | 8 mm | 4 – 20 |
| Drive shaft diameter | 8 mm | 4 – 25 |
| Drive shaft length | 500 mm | 400 – 900 |
| Pillow block bore | 8 mm | 4 – 20 |
| Gearmotor body diameter | 30 mm | 15 – 60 |
| Gearmotor body length | 50 mm | 20 – 120 |
| Coupling diameter | 18 mm | 8 – 40 |
| Coupling length | 16 mm | 6 – 40 |
| Auger center-to-center spacing | 150 mm | 90 – 300 |
| Side rail profile | 20 mm | 10 – 40 |
| Side rail length | 560 mm | 400 – 900 |
| Rail height above auger axis | 26 mm | 10 – 80 |
| Cross member profile | 20 mm | 10 – 40 |
| Support post profile | 9 mm | 5 – 20 |
| Bearing bracket X | 22 mm | 10 – 40 |
| Bearing bracket Y | 22 mm | 10 – 40 |
| Bearing bracket Z | 14 mm | 8 – 30 |
| Enclosure length | 120 mm | 60 – 250 |
| Enclosure width | 55 mm | 30 – 150 |
| Enclosure height | 80 mm | 30 – 200 |
| Enclosure stand-off above rail | 35 mm | 0 – 120 |
| Auger spin pose (motion) | 45 deg | 0 – 360 |
| Colour components | 1 | 0 – 1 |
| Chassis / frame colour | — | — |
| Auger colour | — | — |
| Shaft colour | — | — |
| Motor colour | — | — |
| Coupling colour | — | — |
| Bearing block colour | — | — |
| Enclosure colour | — | — |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
STEPSTLGLB22 PARAMS
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
STEPSTLGLB20 PARAMS
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
STEPSTLGLB4 PARAMS