Terminal Enclosure (15+15+2 = 32 entries)

1 views

Bounding box: 340.0 × 120.0 × 60.0 mm
Engine: Precision B-rep
Parameters: 54
Published: September 17, 2026

Download

Free to download and use. See the terms.

The prompt

اعملي 32 مدخل 15 في كل جنب

Parameters

Name	Value	Range
Base Length	160 mm	60 – 400
Base Width	120 mm	50 – 300
Base Height	60 mm	20 – 200
Wall Thickness	2.5 mm	1.2 – 6
Floor Thickness	3 mm	1.2 – 8
Corner Radius	6 mm	0 – 30
Lid Layout Gap	20 mm	5 – 100
Routing Channel Width	5 mm	2 – 15
Routing Channel Depth	2 mm	0.5 – 6
Cable Tie Slot Length	4 mm	2 – 12
Cable Tie Slot Width	2 mm	1 – 6
Cable Tie Slots Per Side	2 count	1 – 6
PCB Length	120 mm	40 – 350
PCB Width	80 mm	30 – 250
Standoff Inset	5 mm	2 – 20
Standoff Height	6 mm	2 – 25
Standoff Diameter	6 mm	3 – 20
Standoff Hole Depth	6 mm	1 – 25
Standoff Hole Diameter (M3)	2.8 mm	1.5 – 6
Insert Boss Diameter	7 mm	4 – 20
Insert Hole Depth	8 mm	2 – 30
Insert Hole Diameter	4.2 mm	2 – 10
Opto Pattern X	25 mm	5 – 100
Opto Pattern Y	20 mm	5 – 100
Opto Pad Height	4 mm	1 – 15
Opto Pad Size	10 mm	4 – 40
Opto Hole Spacing	7.5 mm	2 – 30
Opto Hole Diameter	3.2 mm	1 – 8
Fan Center Z	30 mm	5 – 150
Fan Cutout Diameter	40 mm	10 – 120
Fan Hole Spacing	32 mm	10 – 100
Fan Hole Diameter	3.2 mm	1.5 – 6
Vent Slot Count	4 count	0 – 12
Vent Slot Offset	26 mm	0 – 80
Vent Slot Pitch	5 mm	1 – 20
Vent Slot Width	2.5 mm	0.5 – 10
Vent Slot Height	10 mm	2 – 40
Terminal Center Z	25 mm	5 – 150
Terminal Opening Width	4 mm	1.5 – 20
Terminal Opening Height	12 mm	3 – 50
Terminal Pitch	7 mm	3 – 20
Terminals Per Side (L/R)	15 count	1 – 20
Divider Groove Width	2 mm	0.5 – 8
Divider Groove Depth	3 mm	0.5 – 10
Divider Groove Length	3 mm	0.5 – 15
Front Terminal Width	30 mm	5 – 120
Front Terminal Height	14 mm	3 – 60
Front Terminal Center Z	25 mm	5 – 150
Power Terminal Pitch	12 mm	4 – 60
Lid Height	6 mm	2 – 30
Lid Top Thickness	3 mm	1 – 15
Lid Lip Clearance	0.3 mm	0.05 – 2
Lid Screw Hole Diameter	4.2 mm	2 – 10
Lid Edge Fillet	1 mm	0 – 5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS