Everything else
Temple Front Part with Y Datum Framework
- Bounding box
- 9040.0 × 900.0 × 7000.1 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model. Do not rebuild it. CORRECTION: "Pronaos Depth Y = 2990 mm" is wrong. 2990 mm is an X-direction facade bay width. Rename: Central Facade Bay Width X = 2990 mm Remove 2990 mm from all Y-depth constraints. KEEP UNCHANGED: Pier centers X = -4270, +4270 mm Column centers X = -1730, +1730 mm Pier size = 500 x 800 mm Column diameter = 460 mm Cella width X = 7220 mm Door = 3000 x 3900 mm Support order = RECTANGLE-CIRCLE-CIRCLE-RECTANGLE Create Y source datums from the measured plan: Y0 = 0 Y1 = 510 Y2 = 2740 Y3 = 3480 Y4 = 4240 Y5 = 9290 Y6 = 9830 mm Overall measured Y chain = 9830 mm. Do NOT guess a new pronaos depth. Do NOT guess cella front/rear Y positions. Do NOT add or change architecture. Mark Cella Wall Height Z = 4360 mm as UNVERIFIED. Only correct the parameters and create the Y datum framework. Stop.
Parameters
| Name | Value | Range |
|---|---|---|
| Left Pier Center X | -4270 mm | -5000 – -3000 |
| Right Pier Center X | 4270 mm | 3000 – 5000 |
| Left Column Center X | -1730 mm | -2000 – -1500 |
| Right Column Center X | 1730 mm | 1500 – 2000 |
| Outer Pier Width X | 500 mm | 400 – 600 |
| Outer Pier Depth Y | 800 mm | 600 – 1000 |
| Inner Column Diameter | 460 mm | 400 – 500 |
| Cella Wall Width X | 7220 mm | 7000 – 7500 |
| Y Datum 00 (South) | 0 mm | 0 – 10000 |
| Y Datum 01 | 510 mm | 0 – 10000 |
| Y Datum 02 | 2740 mm | 0 – 10000 |
| Y Datum 03 | 3480 mm | 0 – 10000 |
| Y Datum 04 | 4240 mm | 0 – 10000 |
| Y Datum 05 | 9290 mm | 0 – 10000 |
| Y Datum 06 (North) | 9830 mm | 0 – 10000 |
| Overall Building Depth Y (measured chain) | 9830 mm | 9000 – 11000 |
| Cella Front Wall Y (UNRESOLVED) | 0 mm | -5000 – 20000 |
| Cella Rear Wall Y (UNRESOLVED) | 10000 mm | 0 – 20000 |
| Pier Height Z | 3000 mm | 2000 – 5000 |
| Column Height Z | 7000 mm | 5000 – 12000 |
| Cella Wall Height Z (UNVERIFIED) | 4360 mm | 3000 – 6000 |
| Cella Wall Thickness (Y) | 500 mm | 300 – 700 |
| Door Clear Width | 3000 mm | 2000 – 4000 |
| Door Clear Height | 3900 mm | 2000 – 5000 |
| Facade Overall Width X | 9040 mm | 8000 – 10000 |
| Central Facade Bay Width X | 2990 mm | 2500 – 3500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like