Everything else
Temperature Sensor Cover
- Bounding box
- 25.6 × 20.6 × 6.8 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
chcialbym zeby stworzyl mi model ktory bede mogl edytowac we freecad. To ma byc oslona czujnika temperatury. Nakladana oslona w formie jakby miski. sciany boczne wypelnione. od dolu nie m nic bo tam wchodzi plytka czujnika. grubosc scian to 0.8 mm. wysokosc calosci 5 mm. w srdek musi wejsc plytka o rozmiarach 24 na 19 mm. gora tej pokrywy ma miec na srodku otwor o srdnicy takiej zeby mogl spokojnie wystawac czujnik w obudowie to92. w rogach przeciwleglych kolejne otwory (2). srednica otworu to 5 mm. dodatkowo w srodku tej osolny w tych samym rogach otwory maja byc kwadraty o grubosci 0.8 mm na wysokosc 2.6 mm. Sufit oslony oprocz tych 3 dziur mam miec azurowe otwory
Parameters
| Name | Value | Range |
|---|---|---|
| Internal Width | 24 mm | 20 – 30 |
| Internal Depth | 19 mm | 15 – 25 |
| Wall Thickness | 0.8 mm | 0.5 – 2 |
| Total Height | 5 mm | 3 – 10 |
| Mounting Hole Diameter | 5 mm | 3 – 7 |
| Center Hole Diameter | 4.5 mm | 3 – 7 |
| Corner Offset | 3.5 mm | 2 – 6 |
| Vent Hole Diameter | 1 mm | 0.5 – 2 |
| Vent Hole Spacing | 2.5 mm | 2 – 4 |
| Vent Margin | 3 mm | 1 – 5 |
| Boss Height | 2.6 mm | 1 – 5 |
| Boss Wall Thickness | 0.8 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like