Loading the interactive model…
Interactive 3D model of Telescopic Spring MechanismEverything else
Telescopic Spring Mechanism
8 views
- Bounding box
- 60.0 × 16.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Make the tube 38 mm long, with a 12 mm outer diameter and 9 mm inner diameter. Make the rod 5 mm in diameter and the slot 18 mm long.
Parameters
| Name | Value | Range |
|---|---|---|
| Tube OD | 12 mm | 8 – 20 |
| Tube ID | 9 mm | 5 – 15 |
| Tube Length | 38 mm | 20 – 100 |
| Slot Width | 3 mm | 1 – 10 |
| Slot Length | 18 mm | 5 – 50 |
| Slot Start Offset | 6 mm | 0 – 30 |
| Rod Diameter | 5 mm | 2 – 10 |
| Rod Length | 50 mm | 20 – 150 |
| Pin Hole Offset | 5 mm | 2 – 20 |
| Pin Diameter | 3 mm | 1.5 – 6 |
| Pin Length | 10 mm | 5 – 20 |
| Flange OD | 16 mm | 13 – 30 |
| Flange ID | 12 mm | 8 – 20 |
| Flange Thickness | 4 mm | 1 – 10 |
| Spring OD | 14 mm | 10 – 30 |
| Spring Wire Diameter | 1 mm | 0.5 – 3 |
| Spring Installed Length | 11 mm | 5 – 50 |
| Spring Coils | 8 | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS