Brackets and mounts
Telescopic Extension Assembly
- Bounding box
- 609.6 × 30.0 × 267.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Corrections- THe bottom double sided clamp , face them to the bottom. Keep the bottom bar 10 inches and the top bar 1 feet length. The spring pin projection is not needed this long.
Parameters
| Name | Value | Range |
|---|---|---|
| Vertical Clamp Offset | 50.8 mm | 20 – 100 |
| Clamp Length (X) | 20 mm | 10 – 50 |
| Clamp Width (Y) | 15 mm | 10 – 30 |
| Clamp Height (Z) | 50 mm | 30 – 80 |
| Handlebar Bore Dia | 22.2 mm | 15 – 35 |
| Bottom Bar Length | 254 mm | 100 – 500 |
| Bottom Bar Diameter | 22.2 mm | 10 – 40 |
| Top Bar Length | 304.8 mm | 100 – 500 |
| Top Bar Diameter | 19.05 mm | 10 – 40 |
| T-Joint Outer Diameter | 30 mm | 20 – 50 |
| T-Joint Run Length | 50 mm | 30 – 80 |
| T-Joint Branch Length | 30 mm | 15 – 50 |
| Outer Tube OD | 22.2 mm | 15 – 35 |
| Tube Wall Thickness | 1.5 mm | 0.5 – 5 |
| Outer Tube Length | 127 mm | 50 – 300 |
| Inner Tube OD | 19.05 mm | 10 – 30 |
| Inner Tube Length | 127 mm | 50 – 300 |
| Minimum Overlap | 25.4 mm | 10 – 50 |
| Extension | 20 mm | 0 – 100 |
| Lock Pin Diameter | 5 mm | 2 – 10 |
| Lock Pin Length | 2.5 mm | 0.5 – 20 |
| Lock Pin Offset from Top | 10 mm | 0 – 30 |
| Slot Clearance | 0.5 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent