Teardrop Cord Terminal

1 views

Bounding box: 39.3 × 54.6 × 15 mm
Engine: 3D Printing B-rep
Parameters: 28
Published: November 11, 2026

Download

Free to download and use. See the terms.

The prompt

show all measurements in the image

Parameters

Name	Value	Range
Length, wide end to tip	25 mm	15 – 60
Width at round end	15 mm	10 – 40
Overall height	15 mm	8 – 35
Width at narrow tip	8 mm	6 – 24
Wall thickness	2 mm	1.2 – 3.2
Floor thickness	2 mm	1.2 – 4
Side taper inset at open rim	0.6 mm	0 – 2
Open-rim chamfer	0.8 mm	0 – 2.5
Tip corner radius	1.8 mm	0.4 – 4
Pin shaft hole diameter	4 mm	2 – 8
Boss outer diameter	7 mm	5 – 14
Boss height above floor	8 mm	3 – 24
Pin head seat diameter	6 mm	3 – 12
Pin head seat depth	1.2 mm	0 – 4
Cord exit hole diameter	3.4 mm	2 – 8
Hook section diameter	3 mm	2.4 – 6
Hook height above floor	7.5 mm	4 – 20
Gap from boss to hook post	3.6 mm	1.5 – 8
Hook curve radius	2.5 mm	1.2 – 6
Hook curve angle	125 deg	60 – 160
Side dimple diameter, 0 disables	2.2 mm	0 – 5
Side dimple depth	0.4 mm	0.2 – 1.5
Label text height	2.6 mm	1.4 – 8
Extra gap between label lines	1.2 mm	0.6 – 4
Engraving depth	0.8 mm	0.4 – 2
Label plate thickness	2.4 mm	1.2 – 5
Label plate border	3 mm	1.5 – 8
Label plate overlap into body (mm, negative = overlap)	-0.5 mm	-2 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS