Teardrop Cord Terminal

1 views

Bounding box: 25 × 15 × 15 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: November 11, 2026

Download

Free to download and use. See the terms.

The prompt

Ponteira de cordão em formato de gota (terminal de cortina/persiana), oca, sem tampa. Uma face aberta mostra a cavidade em fechadura: abertura redonda na ponta larga e canal mais estreito até a ponta. Encaixa num pino com cabeça mais larga que o corpo, que entra pelo furo do ressalto interno. Dentro: ressalto cilíndrico com furo central na ponta larga; pequena garra curva ao lado que prende o nó do cordão; o cordão sai pelo furo da ponta estreita. Leve cone nas laterais e bordas levemente arredondadas. Medidas: comprimento 25 mm, largura 15 mm, altura 15 mm, parede 2 mm, cordão 3 mm (furo de saída 3.4 mm), furo interno do pino 4 mm.

Parameters

Name	Value	Range
Length, wide end to tip	25 mm	15 – 60
Width at round end	15 mm	10 – 40
Overall height	15 mm	8 – 35
Width at narrow tip	8 mm	6 – 24
Wall thickness	2 mm	1.2 – 3.2
Floor thickness	2 mm	1.2 – 4
Side taper inset at open rim	0.6 mm	0 – 2
Open-rim chamfer	0.8 mm	0 – 2.5
Tip corner radius	1.8 mm	0.4 – 4
Pin shaft hole diameter	4 mm	2 – 8
Boss outer diameter	7 mm	5 – 14
Boss height above floor	8 mm	3 – 24
Pin head seat diameter	6 mm	3 – 12
Pin head seat depth	1.2 mm	0 – 4
Cord exit hole diameter	3.4 mm	2 – 8
Hook section diameter	3 mm	2.4 – 6
Hook height above floor	7.5 mm	4 – 20
Gap from boss to hook post	3.6 mm	1.5 – 8
Hook curve radius	2.5 mm	1.2 – 6
Hook curve angle	125 deg	60 – 160
Side dimple diameter, 0 disables	2.2 mm	0 – 5
Side dimple depth	0.4 mm	0.2 – 1.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS