Brackets and mounts
Tapo H110 Ceiling Mount Base
- Bounding box
- 52.0 × 52.0 × 3.5 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric circular ceiling mount base for a TP-Link Tapo H110. Units: millimeters. Base diameter: 52 mm. Thickness: 3.5 mm. Round the outside edge with a 0.8 mm fillet. Create two countersunk mounting holes for drywall screws. Hole diameter: 4.2 mm. Countersink: 90°. Add a rear USB cable channel. Channel width: 8 mm. Channel depth: 5 mm. The base must be optimized for FDM printing with PETG.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 52 mm | 20 – 100 |
| Thickness | 3.5 mm | 1 – 10 |
| Edge Fillet | 0.8 mm | 0 – 2 |
| Hole Diameter | 4.2 mm | 1.5 – 10 |
| Countersink Depth | 2 mm | 0.5 – 5 |
| Channel Width | 8 mm | 4 – 15 |
| Channel Depth | 5 mm | 1 – 10 |
| Hole Circle Radius | 18 mm | 5 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent