Brackets and mounts
Tapered Servo Leg Segment
- Bounding box
- 70.0 × 9.8 × 4.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a flat leg segment, 70mm long, 10mm wide at the base tapering to a sharp point at the tip, 4mm thick. At the base end: two mounting holes, 2.5mm diameter, spaced 9.4mm apart, centered on the width, 5mm from the edge (for attaching to a servo horn). The tip should taper smoothly to a blunt point, about 2mm wide at the very end, no separate foot cap needed. Add 2mm fillets on all outer corners except the tapered tip.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 70 mm | 40 – 150 |
| Base Width | 10 mm | 6 – 20 |
| Tip Width | 2 mm | 1 – 6 |
| Thickness | 4 mm | 2 – 8 |
| Hole Diameter | 2.5 mm | 1.5 – 4 |
| Hole Spacing | 9.4 mm | 5 – 20 |
| Hole Distance from Base | 5 mm | 3 – 15 |
| Fillet Radius | 2 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent