Brackets and mounts
Tapered Pod Housing
- Bounding box
- 180.0 × 186.8 × 276.8 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
Main Body: A tapered, box-style pod housing with rounded corners, angled front faceplate, and flat rear mounting surface. Approximate outer dimensions: 250 mm high, 160 mm wide at top, tapering to 93 mm depth. Front Faceplate & Speaker Cutouts: Two vertically aligned circular openings on the front face for flush-mounting tweeters (approx. 32-35 mm diameter each), surrounded by a subtle 0.5 mm recessed gasket channel along the inner perimeter. Mounting Brackets / Tabs: Top Bracket: A thick top flange/tab extending upwards with two through-holes for M5/M6 bolts. Left Side Bracket: A side mounting tab running along the left edge with two through-holes for mounting to the cage. Right Side: Flush/flat edge with no mounting bracket. Structural Features: Triangular reinforcement gussets/fillets added behind the left mounting tab for off-road vibration resistance. Environmental & Hardware Details: Bottom Vent: A small 10 mm semi-circular recess at the bottom base for a hydrophobic mesh vent membrane. Tether Point: A small safety wire loop/boss on the upper rear-left corner. Internal wall thickness optimized for FDM 3D printing (3–4 mm wall thickness throughout)
Parameters
| Name | Value | Range |
|---|---|---|
| Pod Height | 250 mm | 100 – 500 |
| Top Width | 160 mm | 50 – 400 |
| Top Depth (Assumed) | 120 mm | 50 – 250 |
| Bottom Width (Assumed) | 160 mm | 50 – 400 |
| Bottom Depth (Given) | 93 mm | 30 – 200 |
| Wall Thickness | 3 mm | 1 – 5 |
| Top Bracket Height | 20 mm | 5 – 50 |
| Top Bracket Depth (X) | 30 mm | 10 – 120 |
| Top Bracket Hole Diameter | 6.5 mm | 5 – 10 |
| Top Bracket Hole Spacing (Y) | 100 mm | 20 – 150 |
| Side Bracket Length (Z) | 100 mm | 40 – 200 |
| Side Bracket Protrusion (Y) | 20 mm | 10 – 40 |
| Side Bracket Depth (X, =Top Depth) | 120 mm | 50 – 250 |
| Side Bracket Hole Diameter | 6.5 mm | 5 – 10 |
| Side Bracket Hole Spacing (Z) | 80 mm | 20 – 150 |
| Enable Gussets (1=yes) | 1 | 0 – 1 |
| Gusset Vertical Leg | 20 mm | 5 – 50 |
| Speaker Cutout Diameter | 33 mm | 20 – 50 |
| Speaker Vertical Spacing | 100 mm | 40 – 200 |
| Bottom Vent Hole Diameter | 10 mm | 5 – 20 |
| Vent X Offset from Rear | 30 mm | 5 – 60 |
| Vent Y Center | 0 mm | -80 – 80 |
| Tether Boss Radius | 5 mm | 2 – 10 |
| Tether Boss Height | 10 mm | 5 – 30 |
| Tether Loop Hole Diameter | 3 mm | 1 – 6 |
| Tether X Offset from Rear | 15 mm | 5 – 60 |
| Tether Y Offset from Center | -70 mm | -80 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent