TANCAM Four-Lobe Mounting Bracket

1 views

Bounding box: 180.0 × 180.0 × 11.6 mm
Engine: 3D Printing B-rep
Parameters: 17
Published: November 3, 2026

Download

Free to download and use. See the terms.

The prompt

Create the surface model as per the given drawing. e given drawing. Generate all surfaces, join them, apply the he surface thickness and ensure correct continuity, holes / slots and dimensions.

Parameters

Name	Value	Range
Overall width across opposite lobes	180 mm	100 – 320
Radius of each arm lobe	45 mm	20 – 90
Blend radius between the arms	6 mm	1 – 20
Base plate thickness	4.5 mm	2 – 10
Overall height at the centre boss	11.5 mm	5 – 30
Boss square side, rotated 45 deg	44 mm	20 – 90
Boss corner radius	12 mm	2 – 25
Square hole side	22 mm	6 – 70
Square hole corner radius	4 mm	1 – 12
Chamfer on boss and hole edges	1.2 mm	0.4 – 3
Width of the raised cross rib	34 mm	10 – 70
Height of the raised rib	8 mm	3 – 12
Chamfer on the rib top edge	1.2 mm	0.5 – 3
Rib end inset from the outer edge	6 mm	2 – 25
Mounting hole diameter	4.5 mm	2 – 10
Hole distance from the centre	62 mm	30 – 110
Hole offset from the arm centreline	22 mm	5 – 60

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS