Brackets and mounts
Tactical Interceptor UAV
- Bounding box
- 536.5 × 550.0 × 101.3 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
3D model of fixed-wing tactical interceptor UAV: 480mm long fuselage, 75mm diameter, 550mm wingspan swept-back wings at 20° with 140mm root chord. Nose-mounted 48mm spherical sensor dome, forward canards at 65mm from nose, full-span rear elevons, tail pusher propeller, 25mm ventral fin, side pitot probe. Center warhead section with external fragmentation grooves, tapered nose and tail cones, motor housing with 6 cooling vents. Manifold STL-ready geometry.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage Length | 480 mm | 200 – 600 |
| Fuselage Diameter | 75 mm | 50 – 100 |
| Nose Cone Length | 100 mm | 50 – 150 |
| Tail Cone Length | 130 mm | 50 – 200 |
| Tail End Diameter | 20 mm | 5 – 50 |
| Groove Count | 8 | 2 – 24 |
| Groove Depth | 2 mm | 0.5 – 5 |
| Groove Width | 3 mm | 1 – 8 |
| Dome Diameter | 48 mm | 30 – 80 |
| Canard Total Span | 180 mm | 100 – 300 |
| Canard Chord | 70 mm | 30 – 150 |
| Canard X from Nose | 65 mm | 20 – 120 |
| Canard Thickness | 2 mm | 0.5 – 6 |
| Wing Total Span | 550 mm | 300 – 700 |
| Wing Sweep (deg) | 20 deg | 0 – 40 |
| Wing Root Chord | 140 mm | 80 – 200 |
| Wing Tip Chord | 70 mm | 30 – 140 |
| Wing Root X Position | 200 mm | 100 – 350 |
| Wing Thickness | 4 mm | 0.5 – 10 |
| Elevon Chord | 30 mm | 10 – 50 |
| Elevon Span per Side | 237.5 mm | 50 – 300 |
| Elevon Thickness | 2 mm | 0.5 – 5 |
| Motor Housing Length | 100 mm | 50 – 150 |
| Motor Outer Diameter | 78 mm | 60 – 100 |
| Motor Inner Diameter | 75 mm | 50 – 95 |
| Motor X Start | 300 mm | 200 – 400 |
| Vent Count | 6 | 2 – 12 |
| Vent Width | 8 mm | 2 – 20 |
| Vent Depth | 10 mm | 2 – 40 |
| Propeller Diameter | 150 mm | 80 – 200 |
| Hub Diameter | 20 mm | 5 – 40 |
| Blade Width | 15 mm | 5 – 30 |
| Blade Thickness | 2 mm | 0.5 – 5 |
| Shaft Length | 20 mm | 5 – 50 |
| Propeller X Center | 505 mm | 450 – 550 |
| Ventral Fin Length | 80 mm | 40 – 120 |
| Ventral Fin Height | 25 mm | 10 – 50 |
| Ventral Fin Thickness | 2 mm | 0.5 – 5 |
| Ventral Fin X Center | 350 mm | 250 – 450 |
| Pitot Diameter | 8 mm | 2 – 15 |
| Pitot Length | 45 mm | 20 – 80 |
| Pitot X Position | 30 mm | 0 – 100 |
| Pitot Y Surface Offset | 60 mm | 37.5 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent