Brackets and mounts
Tablet Enclosure with External Rear Bosses
- Bounding box
- 296.0 × 216.0 × 28.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing enclosure without changing the tablet dimensions, outer dimensions, bezel, tray depth, shoulder, wall thickness, or clearances. Relocate all four M4 rear-cover mounting bosses so that no portion of any boss intrudes into the tablet tray or the 270 mm × 190 mm clear tablet cavity. Integrate the mounting holes into reinforced outer corner sections of the enclosure walls instead of using free-standing posts inside the cavity. Retain four 4 mm mounting holes and at least 2 mm of solid material around every hole. Keep the holes accessible from the rear. Do not add the rear cover, connector openings, camera opening, handles, battery compartment, or Kinect mount yet.
Parameters
| Name | Value | Range |
|---|---|---|
| Tablet Length | 270 mm | 50 – 500 |
| Tablet Width | 190 mm | 30 – 400 |
| Tablet Thickness | 10 mm | 2 – 50 |
| Clearance XY | 2 mm | 0.5 – 10 |
| Clearance Z | 2 mm | 0.5 – 10 |
| Wall Thickness | 3 mm | 1 – 10 |
| Corner Radius | 3 mm | 0 – 10 |
| Shoulder Depth | 5 mm | 1 – 20 |
| Shoulder Shelf Width | 3 mm | 1 – 10 |
| Bezel Lip Width | 4 mm | 1 – 15 |
| Screen Corner Radius | 5 mm | 0 – 20 |
| Tray Depth | 3 mm | 1 – 10 |
| Tray Clearance | 1.5 mm | 0.5 – 5 |
| Shoulder Depth Below Bezel | 2 mm | 0.5 – 8 |
| Boss Diameter | 10 mm | 6 – 20 |
| Boss Hole Diameter | 4 mm | 2 – 8 |
| Boss Height | 6 mm | 3 – 15 |
| Boss Offset (unused) | 5 mm | 0 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent