Everything else
T30 Motor + 14-Plunger Pump Mounting Plate
- Bounding box
- 220 × 120 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 24
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
零件名称：T30无刷电机+14柱塞斜盘泵安装底板 材质：6061-T6铝，板厚10mm 外形：矩形 220(L) × 120(W) mm 基准：底板左下角为参考，X向右，Y向上 【电机安装区域（左侧）】 电机固定座位：适配T30电机外圈安装孔 4个安装通孔 Φ4.5，PCD Φ62，90°均分 电机中心坐标：X=55，Y=60 > 这4个孔用来固定电机外壳，不是转子法兰！ 减震垫安装孔（电机四角外侧）：4×Φ6.5通孔 位置：X15 Y15；X15 Y105；X95 Y15；X95 Y105 【中间避让区（联轴器位置）】 X：95 ~ 135，Y：20 ~ 100 此区域掏空，避让梅花联轴器，开槽宽度80mm，长度40mm 开槽：80(L) × 40(W) 通槽 【泵安装区域（右侧）】 适配市面通用14柱塞洗车泵的4个固定孔（PCD 50） 4个通孔 Φ5.2，PCD Φ50，90°均分 泵中心坐标：X=165，Y=60 减震垫安装孔（泵四角外侧）：4×Φ6.5通孔 位置：X135 Y15；X135 Y105；X205 Y15；X205 Y105 通用加工要求： 1. 所有孔去毛刺，锐边C0.5倒角 2. 底板平面度≤0.1mm 3. 无热处理，铝件本色阳极；钢板可喷黑漆 4. 所有通孔，不攻丝
Parameters
| Name | Value | Range |
|---|---|---|
| Plate length X | 220 mm | 100 – 400 |
| Plate width Y | 120 mm | 60 – 250 |
| Plate thickness | 10 mm | 4 – 20 |
| Edge deburr chamfer C | 0.5 mm | 0 – 2 |
| Motor center X | 55 mm | 20 – 200 |
| Motor center Y | 60 mm | 20 – 100 |
| Motor bolt circle dia | 62 mm | 30 – 120 |
| Motor through hole dia | 4.5 mm | 3 – 8 |
| Pump center X | 165 mm | 100 – 280 |
| Pump center Y | 60 mm | 20 – 100 |
| Pump bolt circle dia | 50 mm | 25 – 110 |
| Pump through hole dia | 5.2 mm | 3 – 8 |
| Slot center X | 115 mm | 60 – 200 |
| Slot center Y | 60 mm | 20 – 100 |
| Slot size along X | 40 mm | 10 – 120 |
| Slot size along Y | 80 mm | 10 – 160 |
| Slot corner radius | 5 mm | 0 – 20 |
| Damper pad hole dia | 6.5 mm | 3 – 12 |
| Damper hole Y (low row) | 15 mm | 5 – 40 |
| Damper hole Y (high row) | 105 mm | 60 – 115 |
| Motor damper X (left) | 15 mm | 0 – 60 |
| Motor damper X (right) | 95 mm | 40 – 120 |
| Pump damper X (left) | 135 mm | 100 – 200 |
| Pump damper X (right) | 205 mm | 150 – 220 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm