Syringe Actuated Airplane Flap

1 views

Bounding box: 150 × 122 × 27.3 mm
Engine: 3D Printing B-rep
Parameters: 19
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

Create a airplane airfoil with flaps made so that I can put a hydraulic syringe into it and it can go from up and down position like an airplane flap.

Parameters

Name	Value	Range
Airfoil chord	150 mm	100 – 250
Wing span	120 mm	80 – 250
Maximum airfoil thickness	27 mm	18 – 45
Flap chord	45 mm	30 – 80
Flap clearance gap	0.8 mm	0.5 – 1.5
Flap deflection, positive down	0 deg	-25 – 35
Syringe barrel diameter	17.4 mm	12 – 25
Syringe fit clearance	0.6 mm	0.3 – 1.2
Syringe bay front position	20 mm	12 – 40
Syringe barrel bay length	75 mm	50 – 100
Syringe center height	14.3 mm	10 – 25
Retaining opening width	14.5 mm	10 – 22
Plunger channel diameter	7 mm	5 – 12
Hinge axis height	5 mm	4 – 12
Hinge knuckle diameter	9 mm	7 – 14
Hinge pin diameter	3.2 mm	3 – 5
Hinge radial clearance	0.3 mm	0.2 – 0.5
Control horn thickness	6 mm	4 – 10
Linkage bolt hole diameter	3.4 mm	3.2 – 5.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS