Gears and transmission
Synchronized Container Cleaning System – Exploded
- Bounding box
- 2561.0 × 190.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric CAD assembly of a synchronized mechanical cleaning system for square containers. General description: - The assembly consists of four identical rotating container holders mounted in a straight line on a wooden base. - Each holder supports one square container measuring 80 mm × 80 mm × 80 mm. - The purpose of the machine is to clean and wipe the outer surfaces of the containers while they rotate. Mechanical layout: - Four rotating platforms equally spaced in a straight line. - Center-to-center distance between holders: 140 mm to prevent collision. - Wooden base dimensions: - Length: approximately 600 mm - Width: 140 mm - Thickness: 18 mm - Each rotating platform is mounted on a vertical steel shaft supported by two ball bearings. - Platform diameter: 100 mm. - Shaft diameter: 10 mm. Gear transmission: - Each shaft carries a spur gear underneath the platform. - All four gears are connected in series so that all platforms rotate synchronously. - Module: 2 - Number of teeth: 40 - Pressure angle: 20° - Gear thickness: 10 mm. - Add an input drive gear connected to a hand crank or electric motor on one end. - All gears rotate at the same speed. Container holder: - Square platform with adjustable side guides. - Four soft foam or felt wiping pads positioned around the container. - Pads lightly press against the four sides of the container. - Leave approximately 5 mm compression on each side. - Pads mounted on adjustable brackets with springs. Materials: - Base: plywood. - Shafts: stainless steel. - Bearings: deep groove ball bearings. - Gears: steel or reinforced nylon. - Wiping pads: foam or felt. - Fasteners: M5 socket head screws. Assembly requirements: - Fully constrained CAD assembly. - All shafts perfectly aligned. - Symmetrical design. - Maintain sufficient clearance to avoid interference between adjacent containers. - Design suitable for manufacturing using CNC machining and 3D printing. Output: - Complete CAD assembly. - Individual parts. - Exploded view. - Isometric view. - Front, side and top views. - Dimensioned engineering drawing. - Parametric design with editable dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 600 mm | 400 – 900 |
| Base Width | 140 mm | 80 – 200 |
| Base Thickness | 18 mm | 10 – 30 |
| Shaft Center Spacing | 140 mm | 100 – 200 |
| Shaft Diameter | 10 mm | 6 – 20 |
| Shaft Length | 120 mm | 60 – 200 |
| Keyway Width | 3 mm | 2 – 5 |
| Keyway Depth | 2 mm | 1 – 4 |
| Bearing Bore | 10 mm | 6 – 20 |
| Bearing OD | 26 mm | 16 – 40 |
| Bearing Width | 8 mm | 4 – 15 |
| Platform Diameter | 100 mm | 60 – 150 |
| Platform Thickness | 8 mm | 4 – 20 |
| Gear Module | 2 mm | 1 – 4 |
| Gear Teeth | 40 | 20 – 60 |
| Gear Face Width | 10 mm | 6 – 20 |
| Crank Arm Length | 120 mm | 60 – 200 |
| Crank Arm Diameter | 8 mm | 4 – 15 |
| Crank Knob Diameter | 20 mm | 10 – 35 |
| Bracket Long Leg | 40 mm | 20 – 60 |
| Bracket Short Leg | 30 mm | 15 – 50 |
| Bracket Thickness | 3 mm | 1.5 – 6 |
| Wiper Pad Length | 40 mm | 20 – 60 |
| Wiper Pad Width | 15 mm | 8 – 25 |
| Wiper Pad Height | 20 mm | 10 – 35 |
| Spring OD | 5 mm | 3 – 10 |
| Spring Free Length | 20 mm | 10 – 40 |
| Container Side Length | 80 mm | 50 – 120 |
| Container Height | 80 mm | 40 – 150 |
| Exploded Layout Gap | 220 mm | 50 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled