Everything else
Synchronized Clamp Housing with Pinion & Ratchet Gear
- Bounding box
- 120.0 × 60.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
⚙️装配体由多个组件组成： 左、右夹持臂 （2个组件）：与壳体底座滑槽【滑动约束】，只能沿水平开合方向移动，其余自由度全部限制； 同步齿轮，左右齿条，转轴（4个组件）：绕不锈钢转轴【旋转约束】；分别与左齿条、右齿条【齿轮啮合】；实现左右臂同步对中； 棘轮齿盘（1个组件）：与同步齿轮同轴固定（随齿轮一起转动）；
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 120 mm | 60 – 240 |
| Body Width | 60 mm | 30 – 160 |
| Base Plate Height | 6 mm | 3 – 20 |
| End Block Height | 22 mm | 8 – 60 |
| End Block Thickness | 6 mm | 3 – 20 |
| Corner Fillet Radius | 2 mm | 0 – 4 |
| Arm Channel Width | 14 mm | 6 – 40 |
| Arm Channel Height | 8 mm | 3 – 30 |
| Arm Channel Offset (Y) | 16 mm | 0 – 60 |
| Arm Channel Bottom Z | 8 mm | 0 – 40 |
| Pin Shaft Diameter | 6 mm | 2 – 20 |
| Shaft Boss Diameter | 20 mm | 8 – 50 |
| Shaft Boss Height | 10 mm | 2 – 40 |
| Sync Gear Module | 2 mm | 0.5 – 5 |
| Sync Gear Teeth | 20 teeth | 8 – 60 |
| Sync Gear Face Width | 8 mm | 2 – 30 |
| Ratchet Tooth Count | 12 teeth | 6 – 40 |
| Ratchet Disc OD | 40 mm | 12 – 100 |
| Ratchet Disc Thickness | 6 mm | 1.5 – 25 |
| Ratchet Tooth Depth | 4 mm | 0.5 – 12 |
| Pawl Slot Width | 8 mm | 2 – 30 |
| Pawl Slot Height | 6 mm | 2 – 30 |
| Pawl Slot Bottom Z | 8 mm | 0 – 40 |
| Pawl Slot Length | 30 mm | 8 – 90 |
| Pawl Spring Pocket Dia | 6 mm | 2 – 20 |
| Pawl Spring Pocket Depth | 8 mm | 1 – 30 |
| Button Slot X Size | 10 mm | 2 – 40 |
| Button Slot Y Size | 10 mm | 2 – 40 |
| Main Spring Pocket Dia | 14 mm | 4 – 40 |
| Main Spring Pocket Depth | 12 mm | 2 – 60 |
| Mounting Hole Dia | 4.5 mm | 1.5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm