Brackets and mounts
Swivel Hook Assembly with Screw-Through Clips
- Bounding box
- 60.0 × 90.0 × 44.0 mm
- Engine
- Precision B-rep
- Parameters
- 64
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
make sure everything needed is added to the structure everything needs to be connected nothing speerate and make sure the attahcment is attached and the clips i was talking about the top layer to the bottom since there needs to be a double whole for the screw to go through
Parameters
| Name | Value | Range |
|---|---|---|
| Backplate Width | 60 mm | 20 – 150 |
| Backplate Height | 60 mm | 20 – 150 |
| Backplate Thickness | 4 mm | 2 – 10 |
| Backplate Corner Radius | 5 mm | 0 – 15 |
| Backplate Mounting Hole Diameter | 5 mm | 2 – 10 |
| Backplate Hole Margin | 8 mm | 2 – 20 |
| Backplate Rib Height | 3 mm | 1 – 8 |
| Backplate Rib Radius | 8 mm | 3 – 20 |
| Backplate Rib Width | 4 mm | 2 – 10 |
| Housing Depth | 20 mm | 5 – 50 |
| Housing Wall Thickness | 3 mm | 1 – 10 |
| Housing Opening Diameter | 30 mm | 5 – 80 |
| Accent Pocket Length | 15 mm | 2 – 40 |
| Accent Pocket Width | 10 mm | 2 – 30 |
| Accent Pocket Depth | 2 mm | 0.5 – 5 |
| Text Emboss Height | 1 mm | 0.1 – 3 |
| Raised Center Radius | 15 mm | 5 – 40 |
| Raised Center Height | 5 mm | 1 – 15 |
| Swivel Yoke Radius | 10 mm | 3 – 30 |
| Swivel Yoke Height | 8 mm | 2 – 20 |
| Swivel Yoke Bore Diameter | 6 mm | 2 – 15 |
| Swivel Yoke Flange Radius | 14 mm | 5 – 40 |
| Swivel Yoke Flange Height | 3 mm | 1 – 10 |
| Carousel Outer Radius | 18 mm | 5 – 50 |
| Carousel Height | 12 mm | 2 – 30 |
| Carousel Bore Diameter | 6 mm | 2 – 15 |
| Clevis Width | 20 mm | 5 – 50 |
| Clevis Height | 15 mm | 5 – 40 |
| Clevis Depth | 10 mm | 2 – 25 |
| Clevis Bore Diameter | 5 mm | 2 – 12 |
| Tilt Bracket Width | 20 mm | 5 – 60 |
| Tilt Bracket Height | 15 mm | 5 – 40 |
| Tilt Bracket Depth | 8 mm | 2 – 20 |
| Tilt Bracket Bore Diameter | 5 mm | 2 – 12 |
| Tilt Loop Outer Diameter | 12 mm | 4 – 30 |
| Tilt Loop Inner Diameter | 6 mm | 2 – 15 |
| Tilt Loop Thickness | 4 mm | 1 – 10 |
| Band Loop Outer Diameter | 25 mm | 10 – 60 |
| Band Loop Inner Diameter | 15 mm | 5 – 40 |
| Band Loop Thickness | 5 mm | 1 – 15 |
| Vertical Pin Diameter | 6 mm | 2 – 15 |
| Vertical Pin Length | 25 mm | 5 – 60 |
| Horizontal Pin Diameter | 5 mm | 2 – 12 |
| Horizontal Pin Length | 20 mm | 5 – 50 |
| Pin Head Diameter | 10 mm | 4 – 20 |
| Pin Head Height | 3 mm | 1 – 8 |
| Accent Insert Width | 5 mm | 2 – 15 |
| Accent Insert Length | 10 mm | 3 – 25 |
| Accent Insert Thickness | 2 mm | 0.5 – 6 |
| Accent Insert X Offset | 12 mm | 2 – 30 |
| Max Assembly Depth | 40 mm | 20 – 100 |
| Hook Base Width | 8 mm | 3 – 20 |
| Hook Base Depth | 10 mm | 3 – 25 |
| Hook Base Height | 8 mm | 3 – 20 |
| Hook Pivot Diameter | 5 mm | 2 – 12 |
| Hook Shaft Height | 15 mm | 5 – 40 |
| Hook Arm Length | 15 mm | 5 – 40 |
| Hook Arm Diameter | 5 mm | 2 – 12 |
| Hook Tip Length | 5 mm | 2 – 15 |
| Clip Width | 6 mm | 2 – 15 |
| Clip Length | 8 mm | 3 – 20 |
| Clip Thickness | 3 mm | 1 – 8 |
| Clip X Offset | 15 mm | 5 – 40 |
| Clip Screw Hole Diameter | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu