Brackets and mounts
SUV Sliding Drawer with Foldable Telescopic Legs
- Bounding box
- 1100.0 × 1110.0 × 766.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 3, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric CAD model of the drawer shown in the reference image: a 1100 mm wide sliding drawer mounted on two telescopic linear rails, designed for an SUV trunk. Key modification: replace the fixed vertical legs with two telescopic legs stored horizontally underneath the drawer. Each leg is attached to the rear edge of the drawer with a horizontal pivot joint. When the drawer is fully extended, the legs rotate 90° downward around the pivot, then the telescopic tubes extend vertically until they reach the ground. Add locking pins for both the pivot and telescopic height adjustment. Create 3 configurations: Closed: drawer inside, legs folded underneath. Extended: drawer fully out, legs still folded. Deployed: legs rotated 90° and extended to the ground. Use realistic aluminium profiles, pivot brackets, shafts, telescopic tubes and adjustable feet. Ensure the folded legs do not interfere with the sliding rails.
Parameters
| Name | Value | Range |
|---|---|---|
| Drawer Width | 1100 mm | 800 – 1400 |
| Drawer Depth | 600 mm | 400 – 900 |
| Drawer Height | 150 mm | 100 – 250 |
| Wall Thickness | 3 mm | 2 – 6 |
| Rail Length | 700 mm | 400 – 1000 |
| Rail Width | 40 mm | 30 – 60 |
| Rail Height | 20 mm | 15 – 30 |
| Leg Profile Size | 40 mm | 30 – 60 |
| Leg Wall Thickness | 3 mm | 2 – 5 |
| Folded Leg Length | 500 mm | 300 – 700 |
| Leg Extension (Deployed) | 300 mm | 0 – 500 |
| Pivot Diameter | 12 mm | 8 – 20 |
| Locking Pin Diameter | 8 mm | 5 – 12 |
| Foot Diameter | 60 mm | 40 – 80 |
| Foot Height | 10 mm | 5 – 20 |
| Configuration | 0 | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent