Brackets and mounts
Surface Go 2 Front Enclosure
- Bounding box
- 255.0 × 185.0 × 16.3 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create only the main front enclosure for a Microsoft Surface Go 2 tablet. Do not include handles, battery compartment, Kinect mount, hinges, tripod mounts, or accessories. Design a rugged rectangular tablet frame with rounded outer corners, 3 mm wall thickness, and 2 mm clearance around the tablet. Include a recessed front opening for the screen, internal retaining tabs to hold the tablet securely, and four rear mounting bosses sized for M4 heat-set threaded inserts. Make the rear side flat so a separate back cover can be attached later. Use clean parametric geometry suitable for 3D printing and export as STEP and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Tablet Width | 245 mm | 200 – 300 |
| Tablet Height | 175 mm | 140 – 220 |
| Tablet Thickness | 8.3 mm | 6 – 12 |
| Clearance around Tablet | 2 mm | 1 – 5 |
| Wall Thickness | 3 mm | 2 – 6 |
| Outer Corner Radius | 5 mm | 2 – 15 |
| Screen Opening Width | 230 mm | 180 – 260 |
| Screen Opening Height | 150 mm | 110 – 190 |
| Screen Clearance (per side) | 1 mm | 0.5 – 3 |
| Tab Width | 10 mm | 5 – 20 |
| Tab Height | 8 mm | 4 – 15 |
| Tab Protrusion (inward) | 1 mm | 0.5 – 2 |
| Boss Outer Diameter | 7 mm | 5 – 12 |
| Boss Inner Diameter (for M4 insert) | 4.2 mm | 3 – 6 |
| Boss Height (protrusion from back) | 5 mm | 3 – 10 |
| Boss Offset from Outer Edge | 10 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent