Surface 3 Tablet Cassette

Modify only the existing right-side connector service opening and wall thickness. Keep the service opening’s longitudinal position: - Start: 90 mm below the tablet’s top edge - End: 145 mm below the tablet’s top edge - Length: 55 mm Change the opening into a true through-window measuring exactly 55 mm long × 10.7 mm high. The 10.7 mm height must expose: - The complete 8.7 mm tablet thickness - 1 mm clearance in front of the tablet - 1 mm clearance behind the tablet Align the opening vertically with the tablet body: its upper boundary must begin 1 mm in front of the tablet’s front surface, and its lower boundary must end 1 mm behind the tablet’s rear surface. Cut completely through the right enclosure wall. This must not be a shallow recess, decorative groove, or narrow slit. Restore Wall Thickness to 4 mm. Preserve: - Current 287 mm × 207 mm × 20 mm exterior envelope - 267 mm × 187 mm × 8.7 mm tablet dimensions - 231.2 mm × 155.1 mm display opening - 3 mm display-opening corner radius - Tray, clearances, shoulder, mounting features, and cable relief Do not change or add any other features.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.