Everything else
Support plate with 3 pointed M8 studs and centered 46 mm die
- Bounding box
- 110 × 100 × 86.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Matier Acier dimension 110 sur 100 mm 12 d’epaisseur 3 trou Tarauder M8 x 1,25 origine coin en bas a gauche x et y vis 1 x 55 mm y 68,78 mm vis 2 38,74 mm y 40,61 mm vis 3 x71,26 mm y 40,61 mm les 3 vis doivent être à la même hauteur de 28,56 mm plus 12 mm de m8 viser dans la plaque de support et le haut de la vis es à 90 degrés et fini en pointe diametre des 3 vis 8mm plus un dee de 46x46x46 poser face differente du dee sur les vise à 90 degre pointe vers le bas aucun contact doit se faire avec les arrete du cube de 46 le dee es parfaitement centrer sur la plaque de 110 mm x 100mm
Parameters
| Name | Value | Range |
|---|---|---|
| Length along X | 110 mm | 50 – 200 |
| Width along Y | 100 mm | 50 – 200 |
| Plate thickness | 12 mm | 4 – 30 |
| Tapped hole Ø | 8 mm | 6.8 – 10 |
| Hole 1 X from left | 55 mm | 0 – 110 |
| Hole 1 Y from bottom | 68.78 mm | 0 – 100 |
| Hole 2 X from left | 38.74 mm | 0 – 110 |
| Hole 2 Y from bottom | 40.61 mm | 0 – 100 |
| Hole 3 X from left | 71.26 mm | 0 – 110 |
| Hole 3 Y from bottom | 40.61 mm | 0 – 100 |
| Stud diameter | 8 mm | 3 – 20 |
| Threaded length in plate | 12 mm | 4 – 30 |
| Height from plate top to point tip | 28.56 mm | 10 – 80 |
| Included point angle | 90 deg | 30 – 150 |
| Cube side | 46 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm