Everything else
Sumo Fighter Robot (200 mm class)
- Bounding box
- 196 × 176 × 77 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Make me a 2d autocad model for 20cm width -length-height robotic sumo fighter
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis width | 150 mm | 80 – 196 |
| Chassis length | 160 mm | 80 – 190 |
| Chassis plate thickness | 10 mm | 4 – 24 |
| Ground clearance under chassis | 12 mm | 6 – 40 |
| Drive wheel diameter | 60 mm | 30 – 100 |
| Drive wheel width | 24 mm | 10 – 40 |
| Blade width | 140 mm | 60 – 196 |
| Blade tip past chassis front | 15 mm | 0 – 60 |
| Blade back edge behind chassis front | 20 mm | 8 – 60 |
| Blade leading edge height | 1 mm | 0.5 – 10 |
| Turret diameter | 70 mm | 30 – 150 |
| Turret height | 55 mm | 20 – 120 |
| Turret offset along chassis | -10 mm | -60 – 60 |
| Rear skid pad diameter | 22 mm | 10 – 40 |
| Rear skid offset along chassis | -70 mm | -100 – 0 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm