Gears and transmission
Sugarcane Gathering System - Exploded
- Bounding box
- 23454.0 × 900.0 × 950.0 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a SolidWorks-style mechanical CAD design of the sugarcane gathering/collecting system in the reference image. Show two identical rotating gathering drums mounted on a welded steel frame, rotating inward to collect sugarcane. Dimensions: Overall width: 2700 mm Drum center distance: 1100 mm Drum diameter: 900 mm Drum height: 550 mm Shaft diameter: 60 mm 3 rotating rings per drum, Ø850 mm 20 gathering fingers per drum Finger length: 250 mm Finger width: 70 mm Finger thickness: 12 mm Finger disc diameter: 800 mm Main frame: 80×80×6 mm steel tube Show the complete assembly, single drum, exploded view, front/side/top views, shaft and bearings, gearbox/hydraulic motor, gathering fingers, finger brackets, rotating rings, side guides, and frame. Use realistic steel construction, bolts, bearings and shafts. Make every component mechanically connected and manufacturable. Green frame, black rotating parts, red gathering fingers. Add dimensions, arrows and rotation directions. Design it as an original engineering concept inspired by the reference, not an exact copy.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 2000 mm | 500 – 5000 |
| Frame Width | 2700 mm | 1000 – 5000 |
| Frame Depth | 800 mm | 300 – 2000 |
| Tube Size | 80 mm | 40 – 200 |
| Mounting Plate Size | 200 mm | 50 – 500 |
| Mounting Plate Thickness | 20 mm | 5 – 50 |
| Drum Center Distance | 1100 mm | 500 – 3000 |
| Drum Diameter | 900 mm | 300 – 2000 |
| Drum Height | 550 mm | 200 – 1500 |
| Drum Bore Diameter | 60 mm | 20 – 200 |
| Finger Disc Diameter | 800 mm | 300 – 1800 |
| Finger Disc Thickness | 20 mm | 5 – 50 |
| Ring Outer Diameter | 850 mm | 300 – 2000 |
| Ring Radial Width | 50 mm | 10 – 200 |
| Ring Thickness | 12 mm | 4 – 50 |
| Ring Hole Diameter | 10 mm | 3 – 30 |
| Ring Hole Count | 12 pcs | 4 – 36 |
| Finger Length | 250 mm | 50 – 600 |
| Finger Width | 70 mm | 20 – 200 |
| Finger Thickness | 12 mm | 3 – 50 |
| Finger Hole Diameter | 10 mm | 3 – 30 |
| Bracket Length | 120 mm | 40 – 300 |
| Bracket Width | 80 mm | 20 – 200 |
| Bracket Thickness | 8 mm | 3 – 30 |
| Bracket Hole Diameter | 12 mm | 3 – 30 |
| Shaft Diameter | 60 mm | 20 – 200 |
| Shaft Length | 650 mm | 100 – 2000 |
| Keyway Width | 18 mm | 5 – 50 |
| Keyway Depth | 6 mm | 2 – 20 |
| Bearing Block Length | 200 mm | 50 – 500 |
| Bearing Block Width | 150 mm | 50 – 400 |
| Bearing Block Height | 100 mm | 30 – 300 |
| Bearing Bore Diameter | 60 mm | 20 – 200 |
| Bearing Bolt Hole Diameter | 16 mm | 5 – 40 |
| Motor Diameter | 200 mm | 50 – 500 |
| Motor Length | 300 mm | 50 – 1000 |
| Gearbox Size | 200 mm | 50 – 500 |
| Coupling Diameter | 80 mm | 20 – 200 |
| Guide Plate Height | 600 mm | 100 – 1500 |
| Guide Plate Width | 300 mm | 50 – 800 |
| Guide Plate Thickness | 8 mm | 3 – 30 |
| Gusset Size | 100 mm | 20 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled