Everything else
Storage Box 250x190x80 with Lid
- Bounding box
- 250 × 190 × 83 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
📦 盒子的總體尺寸（外徑） • 總長度 (X 軸，寬度)：250 mm • 總寬度 (Y 軸，深度)：190 mm • 總高度 (Z 軸)：80 mm（未加頂蓋） • 加上頂蓋（厚度 3mm）後，總高度為 83 mm。 📏 內部空間分配 • 壁厚：3 mm • 內部淨空間：244 mm (長) × 184 mm (寬) × 77 mm (深)
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length, X | 250 mm | 50 – 400 |
| Outer depth, Y | 190 mm | 50 – 400 |
| Outer height without lid | 80 mm | 20 – 300 |
| Side wall thickness | 3 mm | 1.2 – 8 |
| Floor thickness | 3 mm | 1.2 – 8 |
| Outer vertical corner radius | 6 mm | 0 – 20 |
| Inner cavity corner radius | 3 mm | 0 – 20 |
| Lid plate thickness | 3 mm | 1.2 – 10 |
| Locating lip height | 5 mm | 0 – 25 |
| Locating lip wall thickness | 2 mm | 1.2 – 8 |
| Lip-to-cavity clearance per side | 0.25 mm | 0.1 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm