Everything else
Stometric Size 5 Snap-On Mirror Cover
- Bounding box
- 28 × 28 × 4.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 29
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
can u also write numbers on the markings of y axis
Parameters
| Name | Value | Range |
|---|---|---|
| Overall cover diameter | 28 mm | 20 – 60 |
| Overall cover height | 4 mm | 2.5 – 10 |
| Top plate thickness | 1.6 mm | 0.8 – 4 |
| Side wall thickness | 1.6 mm | 1.2 – 4 |
| Size 5 mirror bezel diameter | 24.2 mm | 10 – 50 |
| Sliding clearance per side | 0.2 mm | 0.1 – 0.5 |
| Internal snap lip height | 0.8 mm | 0.4 – 2 |
| Internal snap lip radial depth | 0.35 mm | 0.1 – 1 |
| Outer top edge chamfer | 0.6 mm | 0.2 – 2 |
| X-axis crypt width | 1.2 mm | 0.6 – 4 |
| X-axis crypt depth | 0.8 mm | 0.4 – 1.5 |
| X-axis crypt length | 25.2 mm | 10 – 60 |
| Y-axis line width | 0.3 mm | 0.1 – 1 |
| Y-axis line length | 24 mm | 10 – 60 |
| Y-axis line depth | 0.4 mm | 0.2 – 1 |
| X centre-line engraved width | 0.4 mm | 0.2 – 1.5 |
| X centre-line engraved depth | 0.6 mm | 0.2 – 1.5 |
| X centre-line length | 24 mm | 10 – 60 |
| Scale runs 0..span mm | 24 mm | 4 – 36 |
| Spacing of long ticks | 5 mm | 1 – 12 |
| Spacing of medium ticks | 2 mm | 0 – 12 |
| Engraved tick width | 0.35 mm | 0.2 – 1 |
| Short tick length | 1 mm | 0.3 – 3 |
| Medium tick length | 1.6 mm | 0.5 – 3.5 |
| Long tick length | 2.2 mm | 0.5 – 4 |
| Tick start from the X-centre line | 0.8 mm | 0.5 – 4 |
| Numeral height | 1.4 mm | 1 – 3 |
| Gap between long tick and numeral | 0.3 mm | 0.2 – 2 |
| Engraving depth of ticks/numerals | 0.5 mm | 0.3 – 1.2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm