Everything else
Stepped Shoe Cabinet
- Bounding box
- 1550.0 × 648.0 × 1118.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Make a design for a shoe cabinet which fits the following requirements: The material of the frame is plywood. Width is 155 cm Depth is 35 cm at the narrow part and 63 cm at the widest part. The bottom is uneven. The right starts 15 cm lower than the left side. The length on the bottom right side is 70 cm. There it meets a riser of 15 cm vertically, then continues for 85 cm horizontally making the total length 155 cm. The depth of the cabinet also has two measurements. The left side is placed against a wall which is 28 centimeters deeper than the right part. The orthagonal split (horizontally) where the difference in depth starts, lies at 90.5 cm from the right side. The front of the cabinet is entirely in the same plane.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Thickness | 18 mm | 10 – 30 |
| Total Width | 1550 mm | 1000 – 2000 |
| Left Depth | 630 mm | 300 – 800 |
| Right Depth | 350 mm | 200 – 600 |
| Step X (Depth Change) | 645 mm | 200 – 1400 |
| Lower Bottom Length | 700 mm | 300 – 1000 |
| Riser Height | 150 mm | 50 – 300 |
| Top Panel Z | 1100 mm | 800 – 1500 |
| Left Bottom Z | 150 mm | 0 – 300 |
| Left Side Panel Height | 950 mm | 500 – 1200 |
| Right Side Panel Height | 1100 mm | 600 – 1500 |
| Left Door Width | 850 mm | 400 – 1000 |
| Left Door Height | 950 mm | 400 – 1200 |
| Right Door Width | 700 mm | 300 – 900 |
| Right Door Height | 1100 mm | 500 – 1500 |
| Shelf Vertical Position | 450 mm | 200 – 900 |
| Left Shelf Depth | 630 mm | 300 – 800 |
| Right Shelf Depth | 350 mm | 200 – 600 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like