Stepped Closed-End Threaded Cylinder

3 views

Bounding box: 42.0 × 42.0 × 129.0 mm
Engine: Precision B-rep
Parameters: 9
Published: November 7, 2026

Download

Free to download and use. See the terms.

The prompt

A cylinder with 34mm ID 4 mm wall thickness. 125mm long. At the top of the cylinder,the inside should be threaded M34 x 2.00. The threads should go 22mm in to the cylinder. The inside edge towards the threads should be chamfer 4mm length 40 degrees. 50 mm down from the top of the cylinder, the diameter should be reduced from 34mm to 25mm ID. The reduction should be performed with a small radius, both the inside and outside of the cylinder should have radius so that the transition is smooth. The bottom om the cylinder, the non threaded side with ID 25mm should be closed of with wall thickness 4mm. total inside length from top of outside edge to closed of bottom should be 125mm

Parameters

Name	Value	Range
Top Bore ID	34 mm	10 – 100
Bottom Bore ID	25 mm	5 – 80
Wall Thickness	4 mm	2 – 20
Internal Depth	125 mm	50 – 300
Bottom Wall Thickness	4 mm	2 – 20
Top 34 mm Bore Length	50 mm	10 – 150
Thread Pitch	2 mm	0.5 – 5
Thread Length	22 mm	5 – 100
Thread Relief Depth	1 mm	0.2 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS