Stepped Block with Trapezoidal Rib

1 views

Bounding box: 40 × 25 × 25 mm
Engine: 3D Printing B-rep
Parameters: 15
Published: October 29, 2026

Download

Free to download and use. See the terms.

The prompt

create this cad model

Parameters

Name	Value	Range
Overall length along X	40 mm	20 – 100
Overall depth along Y	25 mm	12 – 80
Overall height along Z	25 mm	12 – 80
Depth of the low front platform	15 mm	6 – 40
Height of the low front platform	8 mm	3 – 20
Rib base length along X	24 mm	10 – 60
Rib flat top length along X	8 mm	4 – 40
Rib height above the rear block	7 mm	2 – 15
Rib inset from rear block side faces	1 mm	0.5 – 5
Rib start offset from the left edge	6 mm	0 – 30
Front notch width	8 mm	2 – 20
Front notch depth into rear block	5 mm	1 – 9
Front notch height above platform	5 mm	1 – 15
Length of the lowered right end	10 mm	4 – 25
Height of the lowered right end	12 mm	4 – 24

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS