Brackets and mounts
Steering Wheel Display Stand
- Bounding box
- 153.0 × 183.0 × 335.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single solid parametric CAD model of a freestanding automotive steering wheel display stand for FDM 3D printing. All dimensions are in millimeters. STEERING WHEEL: * Overall steering wheel diameter: 350 mm. * Central opening: 55 mm diameter. * Central mounting area maximum depth: 56 mm. * Existing steering-wheel bolt pattern: 6 holes on a 70 mm PCD. This is reference information only and MUST NOT be reproduced on the stand. * Distance from the edge of the 55 mm central opening to the lower rim connection: approximately 103 mm. * Distance from the edge of the 55 mm central opening to the region between the lower and side spokes: approximately 121 mm ±1 mm. STAND BASE: * Width: 150 mm. * Depth: 180 mm. * Height: 35 mm. * Solid trapezoidal shape, wider at the bottom for stability. OVERALL STAND: * Total height: 280 mm from the bottom of the base to the center of the steering-wheel mounting interface. * Create one smooth, strong curved vertical support. * Average support thickness: approximately 45 mm. * The support should sweep slightly backward from the base and then curve forward toward the steering wheel. * Keep the steering wheel positioned in front of the support. * Use smooth structural fillets. UPPER MOUNTING INTERFACE: * Circular plate diameter: 110 mm. * Plate thickness: 12 mm. * Tilt the mounting surface 3–4 degrees forward from vertical. CENTRAL MOUNTING RECESS: * One single central blind cylindrical recess. * Diameter: 56 mm. * Depth: 30 mm. * It is designed to receive the 55 mm central part of the steering wheel. * The recess must be completely blind. * It must NOT pass through the mounting plate or support. * The bottom must remain solid. IMPORTANT: * Do NOT create six bolt holes. * Do NOT create any other holes. * Do NOT create slots. * Do NOT hollow the support. * Create one watertight solid body. * Design for strong FDM 3D printing. * Preserve all specified dimensions. * Exportable as STEP and STL. Create a clean, smooth, stable product-design shape with the steering wheel mounted upright in front of the curved support.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Bottom Width | 150 mm | 100 – 200 |
| Base Bottom Depth | 180 mm | 120 – 240 |
| Base Top Width | 140 mm | 100 – 180 |
| Base Top Depth | 170 mm | 110 – 220 |
| Base Height | 35 mm | 20 – 60 |
| Support Width (X) | 45 mm | 25 – 70 |
| Support Bottom Depth (Y) | 80 mm | 40 – 120 |
| Support Top Depth (Y) | 50 mm | 30 – 80 |
| Support Start Y Offset | -25 mm | -60 – 10 |
| Support End Y Offset (Mounting Face) | 30 mm | 0 – 60 |
| Total Height (Base Bottom to Mount Center) | 280 mm | 200 – 350 |
| Mounting Plate Forward Tilt | 3.5 deg | 2 – 5 |
| Mounting Plate Diameter | 110 mm | 80 – 150 |
| Mounting Plate Thickness | 12 mm | 6 – 20 |
| Boss Diameter (Behind Plate) | 72 mm | 60 – 90 |
| Boss Length (Behind Plate) | 23 mm | 15 – 30 |
| Central Recess Diameter | 56 mm | 40 – 70 |
| Central Recess Depth | 30 mm | 20 – 40 |
| Structural Fillet Radius | 4 mm | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu