Brackets and mounts
Steel Truss with Suspended Framing - Exploded Part Layout
- Bounding box
- 75156.0 × 180.0 × 815.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Act as a professional structural steel CAD detailer. Create a complete, editable 3D model and fabrication drawing package for my steel truss and suspended framing system. Project specifications: - Span: 7,200 mm. - Truss depth: 450 mm. - Two parallel truss planes, spaced 120 mm apart. - Top and bottom chords: paired RHS 50×30×3 mm. - Diagonals: L40×40×4 mm. - Verticals: FL40×8 mm. - Hangers: investigate RHS 40×20×1.5 mm. - Include all transverse members, secondary framing, plates, brackets, and connections. Requirements: 1. Model every component as a separate solid using accurate profiles and thicknesses. 2. Preserve the specified arrangement and dimensions. 3. Generate complete front, rear, side, and top views. 4. Provide cross-sections for every distinct connection and assembly condition. 5. Detail every member, plate, bolt, weld, and connection with dimensions. 6. Generate exploded views, fabrication details, and erection drawings. 7. Produce a complete BOM with quantities, cut lengths, and weights. 8. Check geometry, connectivity, dimensions, and drawing consistency. Deliverables: Editable CAD, STEP, DXF, PDF drawings, and BOM spreadsheet. Work like a professional steel fabrication detailing office. Do not omit any component or necessary section. Never invent missing dimensions or claim structural approval without verification.
Parameters
| Name | Value | Range |
|---|---|---|
| Explode layout gap (X) | 8500 mm | 7500 – 20000 |
| Truss span | 7200 mm | 1000 – 12000 |
| Truss depth (chord centreline to centreline) | 450 mm | 200 – 1500 |
| Truss plane spacing | 120 mm | 60 – 500 |
| Panel length (assumed) | 900 mm | 300 – 1800 |
| Chord RHS depth (vertical) | 50 mm | 20 – 120 |
| Chord RHS width (in plane spacing direction) | 30 mm | 15 – 80 |
| Chord RHS wall thickness | 3 mm | 1 – 6 |
| Diagonal angle leg size | 40 mm | 20 – 100 |
| Diagonal angle thickness | 4 mm | 2 – 10 |
| Vertical flat bar width | 40 mm | 20 – 100 |
| Vertical flat bar thickness | 8 mm | 3 – 20 |
| Hanger RHS width (along span) | 40 mm | 20 – 100 |
| Hanger RHS depth (across planes) | 20 mm | 10 – 60 |
| Hanger wall thickness | 1.5 mm | 1 – 4 |
| Hanger length (assumed) | 300 mm | 50 – 1000 |
| Hanger pitch along span (assumed) | 1800 mm | 600 – 3600 |
| Gusset plate size (assumed) | 80 mm | 40 – 200 |
| Gusset plate thickness (assumed) | 8 mm | 4 – 20 |
| Transverse tie square bar (assumed) | 25 mm | 10 – 60 |
| End bearing plate length along span (assumed) | 200 mm | 80 – 400 |
| End bearing plate width (assumed) | 180 mm | 80 – 400 |
| End bearing plate thickness (assumed) | 12 mm | 6 – 30 |
| Anchor bolt diameter (assumed M12) | 12 mm | 6 – 30 |
| Anchor bolt shank length (assumed) | 40 mm | 20 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
