Steel Curtain Wall Facade Module

2 views

Bounding box: 137 × 227.5 × 21.9 mm
Engine: 3D Printing B-rep
Parameters: 26
Published: November 3, 2026

Download

Free to download and use. See the terms.

The prompt

add steel columns to the facade to support external glass fit

Parameters

Name	Value	Range
Panel module width	60 mm	30 – 120
Storey height	75 mm	40 – 150
Facade depth	12 mm	8 – 30
Mullion (vertical member) width	8 mm	4 – 16
Transom (horizontal member) height	6 mm	3 – 12
Spandrel band height	22 mm	0 – 60
Spandrel reveal depth	4 mm	0 – 10
Glazing thickness	2 mm	1.2 – 6
Glazing recess from face	2 mm	0 – 6
Glazing rebate ledge	1.5 mm	0.8 – 3
Shadow groove width	1.6 mm	0.8 – 4
Shadow groove depth	1.5 mm	0.5 – 4
Alignment pin diameter	3 mm	2.5 – 6
Alignment pin length	2.5 mm	1 – 6
Fit clearance	0.25 mm	0.1 – 0.5
Column width	12 mm	6 – 30
Column projection beyond facade face	9 mm	4 – 25
Column embedment into facade face	0.6 mm	0.4 – 2
Column front land width each side	2 mm	0.5 – 6
Column front shadow groove depth	1.5 mm	0.5 – 4
Column corner chamfer	1.5 mm	0 – 5
Column head/foot plate height	4 mm	0 – 12
Column plate flare each side	2.5 mm	0 – 8
Fixing bolt head diameter	3.2 mm	2 – 6
Panels across	2 mm	1 – 6
Panels tall	3 mm	1 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS