Everything else
Staffa PETG — esagoni simmetrici a 45° senza supporto
- Bounding box
- 104.0 × 75.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Aggiornamento build-96c47412a4ef: alleggerimenti esagonali resi simmetrici, con due falde a45° sia sopra sia sotto rispetto all'orientamento su fianco. Vertice inferiore esteso alla stessa distanza del superiore. Applicato a entrambe le piastre, stessi centri e passo degli alleggerimenti; fori fissaggio, rinforzi, quote e orientamento invariati. Nessun supporto removibile.
Parameters
| Name | Value | Range |
|---|---|---|
| Larghezza | 80 mm | 76 – 150 |
| Altezza esterna | 104 mm | 104 – 200 |
| Profondità esterna | 70 mm | 65 – 150 |
| Spessore piastre | 5 mm | 4 – 8 |
| Foro centrale | 40 mm | 30 – 42 |
| Circonferenza fori | 60 mm | 56 – 64 |
| Fori verticali | 4 mm | 3 – 5 |
| Fori muro | 5 mm | 4 – 6 |
| Interasse fori muro | 40 mm | 36 – 44 |
| Posizione fori muro | 35 mm | 30 – 40 |
| Raggio angoli esterni | 8 mm | 4 – 10 |
| Raggio raccordo interno continuo | 8 mm | 5 – 10 |
| Spessore nervature | 5 mm | 4 – 6 |
| Sviluppo nervature sulla base | 35 mm | 25 – 40 |
| Altezza nervature | 30 mm | 25 – 35 |
| Centro foro inferiore dal bordo basso | 29 mm | 26 – 30 |
| Raggio esagoni | 4.5 mm | 3 – 5 |
| Separazione esagoni | 2.5 mm | 2 – 4 |
| Bordo pieno esterno | 7 mm | 6 – 9 |
| Fascia piena giunzione | 15 mm | 14 – 18 |
| Corona piena foro centrale | 5 mm | 4 – 7 |
| Spessore totale ai quattro fori | 10 mm | 10 – 14 |
| Raggio base risalti posteriori | 8 mm | 7 – 8.5 |
| Raggio estremità risalti | 6.5 mm | 6 – 7 |
| Zona piena attorno fissaggi base | 7 mm | 6 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
