Everything else
Stackable Lab Tube Rack (3 Layers)
- Bounding box
- 85 × 85 × 120.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
looks allready good but the holes are 12.4mm my tubes are only 11 thats why i asked for 12mm holes. can you make them smaller to 12mm and is there a possibility to add more?
Parameters
| Name | Value | Range |
|---|---|---|
| Plate diameter | 85 mm | 50 – 90 |
| Plate thickness | 2 mm | 1.5 – 5 |
| Standoff height, layer pitch = leg_h + plate_t | 38 mm | 10 – 80 |
| Number of legs | 3 mm | 3 – 6 |
| Leg arc span | 24 deg | 8 – 60 |
| Leg radial width | 7 mm | 3 – 15 |
| Plate rim chamfer | 0.6 mm | 0.2 – 1.5 |
| Tube hole dia. - 11 mm tube + clearance | 12 mm | 10 – 16 |
| Hex grid pitch of the tube holes | 13.2 mm | 12 – 20 |
| Material between hole and plate edge | 1.5 mm | 0.8 – 6 |
| Hole pattern rotation against the legs | 15 deg | 0 – 60 |
| Central hole diameter | 5 mm | 3 – 10 |
| Overlap between stacked layers | 0.5 mm | 0 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm