Everything else
St. Nicholas Church Pruchnik - Snap-Fit Kit Card
- Bounding box
- 1565.0 × 200.0 × 2.0 mm
- Engine
- Precision B-rep
- Parameters
- 40
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable snap-fit kit-card of the historic St. Nicholas Church in Pruchnik, Poland (featuring a massive front tower, sloped wall buttresses, nave, presbytery, and pitched roofs). All parts must fit inside a 200 x 200 mm (or 150 x 150 mm) flat sprue frame, 2 mm thick, designed to be cut out and assembled without glue using press-fit tabs and slots (0.2 mm tolerance), separated into up to 4 colors.
Parameters
| Name | Value | Range |
|---|---|---|
| Sheet thickness | 2 mm | 1 – 4 |
| Press-fit clearance | 0.2 mm | 0.05 – 0.5 |
| Tab width | 8 mm | 4 – 16 |
| Tab height / slot height | 3 mm | 1.5 – 8 |
| Exploded layout gap | 15 mm | 2 – 60 |
| Sprue frame size | 200 mm | 100 – 260 |
| Frame border width | 8 mm | 3 – 20 |
| Frame rib width | 6 mm | 2 – 20 |
| Tower net width | 110 mm | 60 – 170 |
| Tower net height | 85 mm | 40 – 140 |
| Front facade width | 40 mm | 20 – 80 |
| Facade window width | 7 mm | 3 – 20 |
| Facade window height | 22 mm | 8 – 50 |
| Portal width | 14 mm | 6 – 30 |
| Portal height | 26 mm | 8 – 45 |
| Spire roof net size | 80 mm | 40 – 140 |
| Nave net width | 140 mm | 60 – 200 |
| Nave net height | 55 mm | 30 – 100 |
| Window width | 9 mm | 3 – 25 |
| Window height | 20 mm | 6 – 45 |
| Presbytery net width | 100 mm | 40 – 160 |
| Presbytery net height | 45 mm | 20 – 90 |
| Nave roof net length | 130 mm | 60 – 200 |
| Nave roof net width | 40 mm | 20 – 90 |
| Presbytery roof length | 80 mm | 40 – 140 |
| Presbytery roof width | 35 mm | 15 – 80 |
| Ridge snap slot count | 5 pcs | 1 – 12 |
| Ridge snap slot length | 10 mm | 3 – 25 |
| Ridge snap slot width | 3 mm | 1 – 8 |
| Buttress fin base | 8 mm | 3 – 25 |
| Buttress fin height | 24 mm | 8 – 60 |
| Buttress fin count | 6 pcs | 1 – 12 |
| Floor plate length | 160 mm | 60 – 220 |
| Floor plate width | 90 mm | 40 – 150 |
| Ridge cap length | 40 mm | 10 – 80 |
| Ridge cap width | 6 mm | 3 – 20 |
| Edge trim length | 25 mm | 8 – 60 |
| Snap key strip length | 18 mm | 6 – 40 |
| Snap key strip width | 4 mm | 2 – 15 |
| Snap key strip count | 4 pcs | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
