Everything else
SRF05 Angled Sensor Mount Bracket
- Bounding box
- 60.0 × 32.6 × 53.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
tôi đang có dự án xe robotsumo 3kg 2 bánh với động cơ gb37 và gắn 2 con cảm biến 2 bên hông xe bằng srf05 chếch một gốc so phía trước một gốc để có thể quan sát được và có gá để gắn cảm biến
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 60 mm | 20 – 150 |
| Base Width | 25 mm | 10 – 100 |
| Base Thickness | 3 mm | 1 – 10 |
| Sensor Wall Length | 60 mm | 20 – 150 |
| Sensor Wall Height | 50 mm | 20 – 120 |
| Sensor Wall Thickness | 3 mm | 1 – 10 |
| Forward Yaw Angle | 30 deg | 0 – 60 |
| Sensor Center Vertical Offset | 0 mm | -20 – 20 |
| Sensor Mount Hole Spacing | 40 mm | 10 – 100 |
| Sensor Mount Hole Diameter | 3 mm | 1 – 8 |
| Transducer Spacing | 22 mm | 10 – 60 |
| Transducer Diameter | 16 mm | 4 – 40 |
| Transducer Clearance (Radial) | 1 mm | 0 – 5 |
| Chassis Mount Hole Spacing | 40 mm | 10 – 120 |
| Chassis Mount Hole Diameter | 3.2 mm | 1 – 8 |
| Edge Fillet Radius | 1.5 mm | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm