Square Tank 0.6 gal with Removable Lid and Offset 1.5" Inlet

1 views

Bounding box: 152 × 152 × 152.8 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: November 7, 2026

Download

Free to download and use. See the terms.

The prompt

Add 1.5 inch inlet to the top and offset it to one side

Parameters

Name	Value	Range
Nominal capacity (ml)	2271 mm	250 – 5000
Outer width across flats	140 mm	60 – 300
Outer corner radius	22 mm	4 – 60
Side wall thickness	3 mm	1.2 – 6
Floor thickness	3 mm	1.2 – 10
Top lip overhang per side	4 mm	1 – 12
Top lip height	4 mm	1 – 12
Lid plate thickness	4 mm	2 – 10
Lid overhang past lip	2 mm	0 – 8
Plug depth into tank	9 mm	3 – 25
Plug wall thickness	2.4 mm	1.2 – 6
Sliding clearance per side	0.25 mm	0.1 – 0.6
Knob diameter	26 mm	8 – 60
Knob height	12 mm	3 – 40
Inlet bore diameter, 1.5 in nominal	38.1 mm	10 – 80
Inlet boss wall thickness	3 mm	1.2 – 8
Inlet boss height above lid plate	14 mm	3 – 40
Inlet centre offset from tank centre	38 mm	0 – 55
Bore lead-in chamfer	2 mm	0 – 6
Cap flange thickness	4 mm	2 – 10
Cap spigot length	12 mm	4 – 30
Cap sliding clearance per side	0.25 mm	0.1 – 0.6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS